Well, the Admiral has spoken. She is serious about finding a way to cover up the 1987 counter tops and accent surfaces on our 3807. When you...
Try calling Northland Supply in Keswick, Ontario. He's the distributer for pretty much all of southern and central Ontario. He'd be able to...
There is no access. You have to remove the header valance. It's the long box that runs from the port quarter to the shower wall (cabin side)....
I have an older Cetrek 727 auto pilot and would also like to install a rudder indicator. I wonder if this unit has a plug for it. I'm not at the...
I have two big blocks and removed the choke assemblies from both engines. Now all I do to start up is pump the throttles a couple times and then...
The flat head Fords were built by Ford and used extensively in tractors, for years. If you join a Ford tractor discussion group, you may find...
Hey snelltytke11, do you remember the brand or the product name you used for this?
I don't think you would be able to pull it through. It's most likely clamped along the way. The rear access to the shore power receptacles is...
I have the same boat. Although I've never needed to trace them, I'm pretty sure they run along the port side (behind your head board, the...
I frequently clean the drain slots in the lower window frame with some mechanic's wire or the tip of a medium sized cable tie. You would be...
Are we positive that it's a circuit issue? I had a friend with a 6.5 that did the same thing. He tried an old mechanic's trick whereby he...
Thanks Bliss I knew it was a flat head Ford block that they used in tractors for years. I never thought of going through Ford for the wires....
I'll play along. About 10% of the cost of a new genset. I just replaced the same parts, minus points on the mains. Came out to less than 2% of...
Can anyone advise if anyone produces aftermarket Kohler ignition parts? I have a 1987 7.5KW model which is begining to show signs requiring a...
The guys are right. Look everywhere. The boat is not that old but don't discount the possibility of the water heater tank corroding at the...
I used to own a 1990 3207. Mine had the double berth on the stbd side in the aft cabin. That left a large caninet on the port side in the aft...
Don't get me wrong. I love my Kohler 7.5. It runs quietly at 1800 RM. It's a flat head 4 cyl which have been built for almost a century and...
Removing Windows I need to remove the salon windows to get the sofa out for re-upholstering. The window frame needs to be SLIGHTLY spread...
Hey Phillip J I too have a Kohler genny in my Carver 3807. It was surging a bit so I decided to give it a tune up. Cap rotor, plugs, wires etc...
