I like to do the basic diagnosis and eliminate the obvious stuff. I'm almost at the end of the DIY list. I don't simply "throw parts at it" until...
rcrapps: I did isolate the choke. Same result. Maybe Knot: oil level was checked early on. it's up and the pressure is at recommended level.
Just built two out of ABS pipe, a union for opening and barb couplings. Two female 3/4 garden hose fittings fit into short lengths of hose and...
I replaced mine. Bought an aftermarket, adjustable unit and had it in in no time.
My model has a distributor. I believe the 12VDC exciter current is for magneto ignition only.
Yup, I had disconnected the temp sender and the oil pressure sender. Same problem. Didn't think about the 12 volt exciter voltage. I will have...
My Kohler 7.5R has worked flawlessly for over 20 years. This past weekend, it began the habit of simply shutting down after 25 seconds of...
I suppose you have one more thing to contend with being the salt air. They last longer and rust less in the Great Lakes region. Not to mention...
Not so fast fellas. I have a little experience with the U-line ice maker as margaritas are a must on board, while at anchor of course. If you...
If your 7.5R is installed like mine (cylinders in line with keel), the hour meter should be on the stbd side of the geeny at the rear. You will...
I have a list in Word. I can send it.
Laugh if you will but my wife tried Avon bubble bath in a little water. To my surprise, it brightened up the white vinyl and even cleaned the...
Still working and I expect it to continue. The last U-Line I replaced was 22 years old. The one before that was 19 years. Perhaps climate and...
I don't think you can buy that pipe and system anymore -- I have the same, crimped elbows. However, the new push-on fittings available at your...
Anyone know of a company that makes/distributes plastic ladder steps? I would like to replace the teak steps on the transom/swim ladder. I'm in...
Hi guys, we'll I discovered the problem. The main ejector shaft which is mounted through the front gear plate had some play in it. I simply...
I did look at that possibility and I couldn't find a hatch exactly that size, not that I spent a lot of time looking. Besides that, it meant more...
