I've been boating for going on 30 years starting with a 28 foot Searay and have experienced just about every extreme weather and water condition...
I bought a 2000 506 powered by Volvo 74 TMAD engines. The seller had very little experience operating the boat and often had a captain move the...
I bought a Carver 506 which has is Volvo powered with electronic engine controls. I am looking to install a remote set of controls on the transom...
I would tend to second that advice but also if one did use the BB could one not use some sodium bicarbonate to circulate through the system to...
Davits for Inflatable Dinghies (weaverindustries.com) I installed this system on my first boat, An 83 28 foot Searay Sundancer and it worked great...
Thank you, We really love the marina and it is only30 minutes from our home. Great place to relax on the weekends. I was sure that the boat we...
I think the lawyers charge what they can get away with and has little to do with billed hours. I was quoted 2500 to 5000 bucks. I spoke with the...
We were looking for a Navigator 56 rival because we liked the cabin lay out and were also interested in the Carver 530 Voyager. I did a tone of...
Thanks Tahoe John, Sounds like the $2500 to $5000 that was estimated seems in line as the title and USCG fees are being handled by our loan broker...
Great points, I am comfortable with this transaction as the LLC is only a couple of years old and owned and operated by a sitting superior court...
Do any of you folks that have purchased a yacht in a single asset LLC and used bank financing for the transaction recall and care to share roughly...
Call Ramos Oil in Fairfield, I talked to them a while back and know that they do dockside fueling. They should know which docks they have access...
That is encouraging. Thanks
A buddy is considering moving from a SeaRay 420 to a 48 Ocean Alexander with 500 hp Yanmars. He has Cummins 480 CEs on his 04 420 and actually...
[ATTACH] Here is our answer to the shortage of electricity on the grid here in Ca:D
I have the boat I'm buying on the hard there now. I have been impressed by the yard in general. I only needed bottom paint and prop shaft seals...
Do any of you guys add any salt neutralizer to your flush regimen? I had installed a reservoir and two electric valves via 1/2 inch hoses to the...
Thanks for the response. I measured the total dimension of the bellow with the rotor slid back and sitting overnight. The bellow is compressed...
Does anyone have good advice regarding shaft seals [ATTACH] [ATTACH] These PSS seals are 6 years old and were adjusted in July of 2019 about 60...
Wow what a clean and bright bilge! The Carver 506 I'm buying is pretty grimy and on my short list is deep clean and paint.
