PacBlue and Captain Ralph both correct. Final assembly seems correct with bronze screws, wagers and nuts. The top pin is back n place as a fail...
Below is a picture of the component being dry fit. I decided to use the G10 for the backing plate since the hull was rough and bonding it to the...
The rudder ports were cleaned up like new. The indentation for the rudder port below the hull was larger than the bronze flange so... The...
[ATTACH] The hull where the rudder mounts is solid fiberglass about 1.5 inches thick. Seems pretty substantial though I don’t really know....
A single Seakeeper 6 works fine on my boat with a single 10kw genset. Even with water heater, ac etc on during startup. I sometimes start the...
I like to use the radar overlay to verify the position of marker and bouys. Especially in places with cross channel current with low visibility....
Do impellers bought as spares have a shelf life by which you need to install or throw them out?
Buck Algonquin has a bronze backing plate that seems to be a good fit for the existing rudder posts. The boatyard guys are recommending using G10...
Agree with Pascal, though I do use the shore water hose connected to the cockpit wash down with a pressure reducer to quickly flush out...
I need to replace cracked center front panel currently ez2cy. Got a price using polycarbonate which I read online often has distorted light...
When the yard was prepping for bottom painting they removed the screen and blasted it in their shop, not sure if they used sand or something else...
Picture of the external strainer for the engine on my Ocean [ATTACH]
Good advice. Though my only access to the inside of the tank right now is the sender hole.
Thank you! Makes sense know. Going to be fun fishing out the float.
I pulled the sender. Can’t figure out how it works or find anything like it on-line. Please help me identify it or recommend a reliable...
There is also an access panel at the foot of the v-berth. Good to know if one ever needed to access pipes at the front of the water tank or rerun...
Found it! We are replacing the carpet next week, pulled it up and found the water tank immediately forward of the forward bilge access in the...
Perhaps install the new one somewhere easy to access and leave the existing one in place disconnected
First, thank you all for the advice, made it much easier for me as a first time sportfish and diesel owner. Definitely an educational experience...
The PMY review and performance test on my 2007 Ocean Yachts 46 were done using 28x38 props. Now a 2” pitch reduction to 28x36 seems to be nearly...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")