Would anyone have a good source for screens for the fwd and aft Bomar hatches, or a model # of those? Also need a few for the port hatches. The...
Was able to remove the original refrig by removing the entry doors, it was a tight fit but got it out. The problem I am having is finding a...
Update; West Coast Electronics brought my circa 1987 Robertson AP200DL autopilot control head back to fully functional. A thing of beauty.
Thank you, was able to speak to Rich directly. Not sure why they don't have their number listed on their site for Robertson repairs. Again,...
No number. All correspondence has been by email. Before sending the unit they were quick to respond with technical help and troubleshooting....
Has anyone used West Coast Electronics in Seattle lately? I sent my Robertson AP200DL in for a repair just about a month ago and have not heard...
Thanks. I am at home, about 6 hrs away from the boat for a couple weeks but will find what model I have when I return to the boat. It appears to...
Have Bennett trim tabs on a 1986 Carver 4207. Had the boat hauled and trim tabs were removed and rebed but now the indicators run up and down...
I have an 86 4207 and my fresh water tank is under the aft bed, 170 gals. Under galley floor is a/c pump, much like MysticDolphin. On my boat,...
Refrigerator removal Was just able to free my refrigerator on a 1986 4207. Galley sole has an access panel for a/c water pump. From that panel I...
Sorry I can't help with an answer, but heading to the boat right now to tackle the same problem. I have an 86 4207. If I find a solution will let...
Thank you. Where did you get the zippered cover to fit?
Fuel tanks are located Port and Stbd, but water tank is aft. Once I fill that tank it will really sit low aft. I will add some chain in the rode...
Thanks. The prices I was getting was crazy. Do you need to add some sort of water barrier under a "non marine" mattress? RH
I am thinking of adding a lot more chain to my anchor rode and less rope which should help some. I have looked at moving the water tank forward...
Purchased a 4207 with twin Cat diesels, 1986 year model, which sits with the aft low in the water, not level. Does the 4207 w/diesels tend to sit...
Looking to order new mattresses for 4207. Is the aft cabin mattress a standard size? My forward berth is a walk around and I know that one is...
Just purchased a 1986 Carver 4207 with twin Cat 3116's. Would anyone have real world fuel flow data for this set up? Any other info on the boat...
On a 86' era Carver 4207 where are the a/c units supposed to be located? Thank you in advance Roy
Bid has been accepted on a 86 4207 with Cat 3116's. The hot water heater was removed and not replaced when the PO had problems with it just...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")