is that a new steering wheel you bought? if so what size is it and where did you get it? I've been looking for one. thanks! Tom
I keep my boat in Venice and I follow the Hatteras Forum. Someone brought up the concern of the oil on our hulls, intakes and such. while they...
I have a degree in hospitality management from Penn State. I own a 54' Bertram. I also own my own hotel management company that is fairly...
ok, back at the boat again. so I wanted to check if the voltage was 238 in the front flybridge blower. as I said earlier, touch the green ground...
here are the other 2 pictures
ok guys, got to the boat today. inside my control box when I touch the black and the orange (the orange clips on to the post labeled "fan", I get...
I know where the box is located and it has 2 phone cords. 1 comes from the control panel and the other goes to the evaporator. stange that it...
ahhh....... I checked the 3 wire power line at the connecting point where the wire comes up to the flybridge from the condensing unit in the...
C4ENG, I'll try the reset, but I did note that when I checked the power at the evaporator, it was off when I had the control off, when I turned it...
thanks, I'll try that. no the fans were not turning
I'm hoping one of you guys know the answer to my problem. I recently had a new condensing unit as well as 2 evaporators installed on my boat tied...
for the poster that asked, here is the reply I got from interlux: Good Afternoon Tom, Unfortunately we do not recommend tinting any of our...
here is a picture of my tackle center
its not bear, thats part of the problem. over the years previous owners have had someone lean over and apply a coat of varnish. I'm ready to...
when looking at boats that will be scrapped or sold via auction after a major storm (like Katrina, since I am in New Orleans, I saw a LOT!), I...
it's a 1984 and I'm fairly sure it was not aftermarket as I have seen a few other 54' Berts around my vintage with the same tackle center. my...
I'm thinking Urethane since Bilgekote is solvent based rather than acrylic, which I think is water based. good question. maybe I should shoot an...
I see there are several people on the forum that have worked at Bertram over the years. Perhaps you folks can answer a question I have. I'm about...
my Bert was gecoated in oyster white and it carries down to the engine room. since I'm not painting the whole ER, I'd like the paint to match as...
I paid $210,000 for my Bertram in 2006. spent $65 in the yard before I brought her home. and that was with 2 engines in great shape. a blower,...
