Have you contacted this vendor: https://www.buildasurface.com/request-quote They are part of http://www.teakisle.com/products_marine.asp which...
Mine has worked fine on the inboard side of the intake strainer. Mine is starboard, but doesn't matter. This location is nice because running...
I grew up on a 75 42' and the cockpit deck was just teak planking over framing. No fiberglass liner. I think that has all been replaced since...
Not sure if you are aware that the 43 and 44 are the exact same hull. The interior layout is the difference with 2 heads and mid level galley....
I did this with my generator. It is up against the wall making the pump really hard to access. Installed a 110v impeller pump that runs directly...
Search for "nylon roller latch". Looks like SeaDog 227108 is the same. And actually cheap!!
Agree. I did that several years ago. You just can't see it in the picture.
I'm a bit embarrassed to post this. But hopefully it can help someone else. My port engine has been running a bit high at cruise for quite...
I have the same boat\year. In the forward cabin, open the starboard smaller closet door. The AC unit is in the top of this cabinet and the...
I haven't tried it yet. I cut the vinyl with the razor blade in the hatch seam, and you can barely see it. A suction cup should be able to pull...
Finally got around to getting rid of the carpet in the head. Never liked it. I put 3/4 plywood to make the floor all one level. The floor is...
Did you go through the FI inlet? Wondering how it is this year with shoaling.
I don't see engine exhaust coming out of the stern? Am I missing them in the pic, or it has been modified?
You want to point it where the temp sender is. That is on top of the motor next to the valve cover on the exhaust manifold side. This way you...
Hopefully someone has a Post manual that may specify. Post and Viking used many similar things back then. I wouldn't be surprised if it matches...
Was just at the Palm Beach boat show yesterday and picked up a sample of Plasteak vinyl sheet. Want to put it in the head. Seems easy to cut...
Have wondered that myself. Especially with the Volvo or Cummins engines weighing less than detroits. So the weight difference is actually even...
Those look to be the standard bulkhead factory windows. Just have a sunscreen covering them. This door looks very similar to the factory door,...
I think that is factory. When the cockpit cabinets were rounded and the trim removed, they built the 2 bridge steps into the cabinet. Probably a...
I think that door must be custom\aftermarket. Have only seen sliding doors on 42' and larger Posts. Being an 88. yours would have slid on the...
