I'll look close to see if there is some id on the elbow. Good idea. 3 of the 4 bolts will have to be cut out and then drilled out of the turbo....
Thanks Bill. The starboard side is original so no drawings on file. I talked to Marine Exhaust about the port side (pictured at beginning) and...
The exhaust elbow on the port engine was replaced as RB480 mentioned and is pictured at the beginning of this thread. I don't know why or under...
Thanks guys for all your comments. I finally got down to the boat last weekend and took a good look at the exhaust systems on both engines. The...
The water line is a foot or more below the turbo but as the photo shows the immediate section past the turbo has very little slope down. The...
There is no riser at the turbo. It's a flat elbow out of the turbo and then to the back of the boat.
I'm a little concerned that the exhaust run from my Cummins Diesel powered 355 ACMY maybe a little flat. After posting pics on boatdiesel.com it...
I love my '98 355 ACMY with Cummins Diesels, wife does too.
Specs for my 355 ACMY I cruise my Carver '98 355 ACMY with twin 5.9 Cummins at really only two speeds. At 2300 rpm I get 19 kts and slightly...
I'm considering installing a security system from Flagship Marine that uses deck sensors. Anybody have any experience with this company or use...
I have the same boat without the cockpit. I've had my 355 for a year and love it. The sundeck is a little small for more than 2 people and my wife...
If you can get the owner to give you a ride in the boat before you shell out for a survey and haul out you can get a very good idea on the...
Yup, sounds like a good deal, almost too good!! Especially for diesels. I have the 330 6 BT's and paid a bit more for my 355 ACMY last year.
Thanks guys for the offer to help. I'm re-thinking this whole thing, not because I don't have the skills or understand the dangers of working with...
Well my bilge already has AC current in it, in the form of the 115 v air conditioning circulation pump. I could with a little help figure out a...
My '98 Carver 355 Aft Cabin has 3 bilges. I believe they are connected meaning that water will flow from one to the other if it gets high enough....
Newer is not better, just cheaper to maintain. Mid 80's boats have become difficult to sell, so if price is your primary consideration, then you...
FWIW I love my Carver but will never venture out in 8ft seas. My advice; buy the newest one you can afford. It will be cheaper in the long...
The significant fuel savings on one engine I was referring to above was taken from data I obtained on my Carver 355 ACMY with twin Cummins 6B TA...
I've considered single engine operation too as the fuel savings are significant. However after talking to a tyranny repair tech in Ft Lauderdale...
