Struts and shafts were not checked. The motor mounts also were not checked. The strange thing is this issue popped up from one week to the next...
Anything is possible but this problem was there before the boat was pulled and after the haulout. The reason it was hauled is because of the not...
Yes it does.
I assume they are as he just had them serviced when the boat was hauled. The problem with planing was there before and is still there. We...
Yes it is.
He spoke to someone late yesterday from Offshore and they told him to check a section of the hull for water. Supposedly there is a pocket on the...
Capt J it has always been able to plane at 14 knts with trims full down. He runs it in the intracoastal as well as offshore at 14 knots. The...
PacBlue - no its not the bottom paint it did it before it was hauled and repainted. Yes we ran ran it outside and inside trying to get on plane....
NYCAP agree on the tabs although alot of pressure was applied when they were down as well as up. Fluid is full. I believe that weight for dry...
I'll try to answer some of the questions. Bayoubud you are correct they are C12s. My mistake. The max rpm is 2300 and they will turn that I...
A friend has owned this boat for approx 3-4 yrs. The boat has C18 Cats 700hp ea and about two months ago it would not get up on plane. Its a...
Dockmaster my icemaker hose is 8 ft and also is located in the engine room. It doesn't have near the insulation on it that Cabofly is using and I...
When u replace the bellows u need to press it to the underside of the top piece (it will actually suck onto that piece) that the motor mounts on...
Duckbills were all in correct I've installed them before. It was the bellows that was the issue. I did not preseal the bellow against the...
I just changed the 4 duckbills and while I was at it decided to replace the old bellows as its 15 yrs old. Put back together, pressed floor...
I believe before but I'm not positive on that. Here is a picture if that helps. (Mod Edit: Image size reduced)
In my case it was the old style galvanic isolator 2005 had an issue and tripped the new St Aug marine power pedestals. Electrician disconnected...
Ok thanks. At 1850 rpm the port was -2 and the starboard -3 so all good.
Air Pressure after Filter - At idle one engine reads 0 in WC and the other engine reads -1 in WC. What does this reading actually mean? What is...
Interesting not sure who read the article I posted as their is a couple of options that will greatly improve the shine and last for several years...
