If you fell the boat is right for you, make the investment in an engine survey as well. This will give you a great baseline on where the engines...
I had that problem once and it turned out to be a leaking screw in the toe rail on deck.
Your welcome and good luck with your search.
91 46 is 31.5 from most forward side cleat and 22 from the spring cleat to the stern hauser.
Doing pretty good. Something reached up and took a little bite out of one of my exhaust valves on my way to Highborne Cay this summer. I idled...
Good luck with your good lookin boat! Love those pictures
Hey Ralph, you're as meticulous as I. Some are hard to fix but sooner or later you will be able to get into them to fix.
I agree with Rich, take your time. Be sure about your use of the boat. It will help with your selection and save time and bucks on making right...
My 91 had no space overhead to do flush mounts. There was space 8" above the floor on the starboard side just below where the electric cable...
I doubt it. The water has to flow down not sideways to cause that kind of damage. It only takes one of the screws to seep over the years. Go...
Standard Awlgrip Oyster White. Brush, spray or roll.
I had the problem as well. My source was the screws holding down the bow rail so I pull them all out in re bedded them all and the leak stopped....
Thanks those sound perfect for your application
Hi guys, I found a couple of plastic paint buckets that fit perfectly into the 8in exhaust pipes from the transom. Lightweight and don't take up...
Yep. You can buy the clear rod and make them up your self. I have made both of mine and they came out perfect.
Thanks the forum would not let me post the link to power and motor yacht magazine for some reason. That is what is missing from the link I did...
Thanks captain J, I guess we could monitor the boost at cruise speed and shoot a little wash mix in there and see if the boost goes up a little....
https://www.******************.com/maintenance/how-to-make-sure-your-boats-turbo-runs-forever Still trying to see if you guys see any merit to...
I did the same thing using Metcalf, Fort Lauderdale. They also provided me with excellent turnaround time and great product. I chose fiberglass...
I'm sorry guys,I posted a quick reply to both of you immediately and I don't see it posted. Thanks for your input. I'm not having any Turbo...
