That's all I have ever seen on the boats in our area. It's held up fine in the Gulf of Mexico and St. Thomas. Not saying it's right, I've just...
I type too slow. + 1 on the prybars. Be sure and watch the zinc anodes on that boat. Any aluminum boat needs special attention in that area. Make...
Come on man, how much does a chisel cost? Five or six dollars. Every boat needs a couple of chisels and a couple of punches. Actually several size...
If it's true that there is no activity around the vessel, that's a shame. I have never understood why a company would sit and wait for some type...
I would buy 1 set of 6 point wrenches and sockets to add to the 12 point combination wrenches. They hold better on rusty fasteners. Tool...
Why is chain used on the anchor? I've always used 3/4" line with about 6' of chain for a 50' boat. Is it for larger boats, rocks or just stronger?
About The only place a Velvet drive can lose that much fluid is on the right hand side at the bottom where the fluid returns from the cooler....
Do you know what gear you have or possibly post a picture?
There are three images at the Seattlepi website. The second image looks like there is damage to the hull. Any thoughts?
Some of those designs use fuel or water in tanks to adjust ballast. I doesn't happen quick enough unless she laid on her side for a while. It...
It seems that they have building boats that require ballast to stay upright in that area of the United States for years. My Dad went and looked...
Aluminum gets a build up on the surface that has to be removed to a shiny surface before it can be welded. It also tends to crack when it gets...
If its not picking up a prime you have an air leak prior to the pump. I would also clean out the heat exchanger to make sure you get all of the...
There's a pair of Twin Disc 5075's 1.5 to 1 on the Boat Diesel site for $4750.00 each. Do you have 903 Cummins in your boat?
Check the "Boats and Harbors" website. They usually have a few leads.
They're usually hung on davits so you can launch it and retrieve it. Not sure how you're going to keep a dingy on the dive platform without some...
To answer your question how it's possible, most builders tend to put thru hulls in the waterline where they will be less noticeable. The pump...
If replaced make sure they use monel staples. You may want to look on the net for an upholstery forum. There's one in particular that has a few...
I wouldn't Buy a new heat exchanger bundle until your sure that's what the problem is. Anything that is freshwater cooled is suspect. I'm not...
I think it was a training vessel for Japanese students. The sub was doing a rapid ascent and punched a hole in the vessel. The captain's Navy...
