Oh yes, definitely have seen the loss of signal around the trees and structure! Not so bad when you're flying in the pine stands and have mostly...
Any idea what he was Flying Carl? I looked and couldn't find a reference. Been toying with those goggles for my Mavic Pro, once I switched the...
As many times as I changed kits in her (5!) I should have remembered the cooler was under the blower so TA's Ralph, sorry!
The boat in my signature picture originally had 900 hp 12V71TI's and at our normal 1950 rpm cruise was 32gph per side. They were some of the last...
Yep, the standard phone/cable TV shore inlets do pass through a ground from the shore side effectively bypassing galvanic isolators and isolation...
A lot depends on the area, around here I've found Vesselfinder and Marinetraffic use different shore stations and each has pretty different...
We've also had good luck with Boatlife Lifeseal when rebedding acrylic and glass in hatches and cabin windows.
Come on now Pascal, it's only 2000mm between those dots on your map, that's not all that far! :) I know you've probably still got an old Michelin...
That is a big question Pascal but most sportfish on plane are already running on about 1/3 of their bottom surface already, I can see stability...
I built a little 10' foil hull many moons ago playing with the idea and I managed to get it working after a lot of trial and error. I feel it was...
Was there much crud in the reservoir? The ones I've seen with clogged filters usually had a bunch of sludge in them too.
It's inside the supply line fitting, the larger one on the right in your picture. Unfortunately it will make a mess when you remove it as you'll...
Many builders used the Splendid non-vented units which gave them a pretty bad reputation for huge drying times, the vented models are much faster.
Had an owner hire Blake Stahl (Blake Stahl and Associates) to come up and do an end of build survey on one of ours. I was very impressed with his...
I think Capt J's anecdotal observations from the helm viewpoint may be misleading you a little Liam. Over here we do indeed frequently encounter...
I too have been following this one and love reading every post. drcoastline, most eloquently described his passion and while some may not be as...
I'm not sure of this particular boat but I've seen many installations with the hot water heater inlet feed tapped off the cold side as just...
At least you have a good float switch! :) If that's the Ultra Senior it should have a set of high water alarm contacts you can wire into.
Been bitten by that "CAD" bug more than once, and on those 550's to! Here's a set of Cummins/5065A's going in, notice the big offset on the mount...
PacBlue gives a very good description of how to model engines for layout/fit checking. In the custom world I always have the hangers fabricated to...
.jpg&contenttype=jpeg "Click for Abeking")