Amazing the Capt wasn't killed.
Actually, I thought Cleanslate's job looked good. I'd wait till next time to revarnish, then do the cut and deal with the joint.
If the joint still has some moisture it should be cleaned or cut, dried, and seal with Git-Rot epoxy first.
Nice job.
Make a paste with vinegar, salt, and flour. Apply it to the bronze strainer with a brush and let sit overnight. Clean with a wire brush and...
We did the same years ago and plan to do the same again when this Virus thing settles down. We like Fl Key's.
The way we should all to do business.
Shurhold for brushes and handles and TD chamois mops Recently I bought an O-cedar microfiber mop at HD for all of $9.97. Wanted a lightweight mop...
Ours only has one thru=hull, the bilge drain on the transom. The only other possible openings are pop-out inspection plate on the bow deck and...
I doubt it would sink with the bilge being foamed. Not sure how that much water drained in the bilge unless the deck drains were trashed. Not...
We have 158cs Edgewater for a tender, half the size Pascal needs but are a quality unsinkable boat with all top quality components. Rides very...
Not what we all thought a few months ago. A broker recently told me small boat sales were red hot, they are everywhere. Agree on the PWC's,...
Been doing this for about a year, works well. As Pascal suggests, take the time to route a drain hose to a shower drain/sump and you won't have to...
There are many that have had a bad experience with Marlow's mainly because of the experimental process they were going thru with a non-typical...
Good choice, nothing more aggravating than reinflating and patching air leaks. Plus you can fish without worry of a hook dangling from the tubes....
Happens all the time. Been there.
SLOW DOWN when night running is a must. Electronics are great, use a spotlight and chart if unsure.
The 65/70 Marlow's I've seen had twin gens , one aft of each engine. Just inside the er entering from the crew quarters.
Over time that pulsating thrust could cause various problems with the drive train.
HMMM, first time I've heard that. Might be the results of exhaust getting in tunnels. Our surveyor mention at times seeing the engines moving...
.jpg&contenttype=jpeg "Click for Abeking")