I do not want to Confuse things here but what you say C4ENG sounds like the following which I got directly from the notes in this chapter....
Thanks there C4ENG, How about when you are running them both online and Synced and operate the Switch(Governor Control) and unload the the...
Hi Ya Folks, I am prepping for my MEOL Oral and am at the Electrical Chapter and would like some advice from you more Experienced Engineers out...
I would replace with same pressure rated hoses, as im sure that was the orginal design parameters of the system, maybe just use higher quality...
Cheers K1W1 Im going to keep my Quals through the MCA for now. Aware that alot of vessels require Y4 minimum, however I have worked on Private...
Hi Everyone I have sent my updated CV to various crew agents but thought I would post on here as well. I am experienced Yacht Engineer. I am...
I locktite the bearings into the eyes of the hydraulic rams and knocked old ones out using a socket of suitable size and a mallet. I contacted...
Thanks for all your ideas and help, I finnaly managed to track down a supplier in the UK that stocks these bearings which are supposedly hard to...
thanks captain J. Was actually considering that option.
Hi I thought I would come pick the brains out here.......Sure you will have all sorts of advice so here goes Onboard I have Koopnautic...
Hi Forum Peeps, I need some advice regarding a battery problem on the new boat I have joined. There are 3 battery banks in the engine room one...
yes the wine fridge problem, well i ended up leaving that vessel due to various reasons and one was that my chief eng got electocuted to death at...
Hi board users......Okay just wanna see if anyone can advise me on the folowing...... All our carpet in the interior guest area are cream...
Okay here are the pics with some notes and observations....
1. Laser thermo gun was used so could not get this temp but only had one unit running instead of two so was not very warm. 2. Compressor dome...
I will take more pics of the comps and condensors 2 morrow as i traced all pipe work and there are a few things I find strange, here is a photo of...
OKay I will update 2 morow with actual temps, a few obsservations I did make between the compressor of a fridge that is working and one which is...
1. The compressors and Condensors are situated about 4 meters away from fridge where evaporator is in crew mess. The comp and condensor are...
Okay here I go to ur questions, started looking into the fridge thing again, took temps etc but forgot at boat willl post detailed info shortly,...
Yes so many questions, I appreciate all the input, i have not had any time to look further into this as we are on dry dock and there is so much...
