I'll have to check about the bonding wires there not obvious if they are there been in the lazarette many times
The wheels look normal, will check the bonding wires, the centerline transom zinc is on the lower end of its life. No zincs on rudders shafts or...
Last cleaning my diver noted that both rudders have a pink hue to them. I didn't get photo confirmation but both rudders were coated with the...
Max marine sold the repair side of the company to Sea-tronics they can fix each display $1800 per unit. Also talked with maretron if I have a...
My screens are close to going out and would be nice to see all the data on new 16" furuno displays. Also the MFD will keep track of total fuel...
Has anyone installed the maretron on the CR electronic versions? I have 04 CR900's would love to hook the MMDS data from the displays into our new...
43 FB water tank is leaking, anyone know where to access the tank and it’s fittings? Fresh water is in the midship bilge and the tank drains out...
Quite a large following for those involved in building, maintenance and ownership of Cabo
Just got it good info
We sea trialed a 09’ 40FB with the C-12’s about year half ago in a nasty sea. Did real well 24kts in 3 foot stacked gulf chop, liked it alot but...
Does anyone have the Cabo Yachts sea trial sheets for the 43 fly ??
Full fuel and water 5 guys not a fishing load she turns 2375rpm 33kts. 28x38 federals
43 with MAN 900’s. After running 5 weekend trips the 43 is very load dependent(like most boats). 1/4 tank fuel half water with 12 people the boat...
Update: was a dead short ground at the temp sensor. Temp sensor replaced runs fine. P&D marine orange beach, impressed it got done so quick.
Thanks probably try to change the relays but going to call a tech tomorrow
Generator problem on the 43’ westerbeke 15kw 2005…flipped gen breaker on at DC panel, hit preheat and start like normal and the 8 amp fuse...
Ran boat for few months now, running great with the wheels thanks for the advice.
Ok great info and experience thanks
Ok good to know, I’ve talked to a few other 43 owners with different wheels, one had Veem 30x39 from the factory with paperwork. That’s...
Just got our 43 with 900crm home, had full services done before the trip. Ran great, planning to maybe do some prop tuning
