attached is a photo of an install of Cat 3126- appears to have a higher fuel rate usage than my 6-71's? [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
What compound did you use to remove the stains. Thanks
OK, I wonder if the fuel pump on a 6-71 has enough pressure to push the flow I need to reach WOT going through that device. The flow reached on...
The larger ports I see are for much larger minimum flow, well above the level . If the unit is rated to flow up to 132 GPH how will the smaller...
The maretron inlet and outlet fittings are the same size as the engine block.
I was thinking to plumb them right at the fuel inlet & outlet on the engine head using a 1/4 double male fitting moving the hose existing fittings...
I purchased the M2AR’s - waiting on some more responses from Maretron before I go further and install.
So far into my project...$2,400- 4 flow meters, 2 fm100 and 1 usb100...not sure this is the best solution after doing the research - right now...
[ATTACH] The specs say up to 132 GPH, but will ask if they have an example on 6-71's
I'm getting ready to install Maretron Flow meters. My last boat I installed flow scans; which worked well but looking at this technology as...
I have two sets of original 3 blade 24 x 27 Federal wheels 1 3/4" shaft that came with the boat- if anyone needs them, please let me know what...
[ATTACH] New Stateroom TV enclosure
David Hi, What size inverter would run all of that load and what are you running for batteries? Where did you install the water maker?
I've had both, the II series rides better and is not as wet, you don't catch as much spray over the rails as you would with the earlier hull...
Baltimore Bob, My 1975 did also, but my 1988 does not. Davidoc, What brand did you install, I like the remote idea.
I am trying to locate the Galvanic Isolator on my 1988 46' Post- does anyone know if one would exist, and if so where? Thanks!
HI RT46- are your props cupped? Do you know your EGT's at 2100 and WOT? Thanks
I've read a lot of the prior about 3 & 4 blades- I've got two sets of Federal Props 24 x 27. My WOT is 2400/2370- on fresh rebuilt engines (20...
Hi Matt, my Ideal windlass is only for rope- I've seen people use chain on their's but it harms the chrome finish.
Yeah, I pulled mine out of that tight space to fix the water valve for the ice maker. I noticed how the plumbed a drain/blow out for the icemaker...
