Could it come from THIS product line? If nothing else, those experts in that field could possibly help.
Yes, it was a known good "Y", so I checked the hots on the dock plugs and saw they were in phase. Fortunately, the maintenance man was there and...
There may be issues with the dock wiring. I've found that some marinas don't have 2 phase running down each side of a dock. In order to find two...
As you're asking about getting away from a dock, the potential is: If you're Starboard t0, Starboard gear forward, port gear aft, rudder hard to...
When I first was involved with dripless seals, the info at time of installation was that the reason for the forced water was that at speed, the...
We had a bottom job done on a 74' yacht at a yard in the Miami river. They were big on selling jobs while the yacht was out. They assumed we would...
Once, when I was away from the yacht, the owner found that the deck pump out would not work. Plenty of suction, but no lift. Being the resourceful...
Post #49: "A new key was made for the coupler bore." You may be able to see a gap between the coupler and shaft on the side where the key is. If...
It may be worth monitoring the voltage supply. Local brownouts can trip breakers.
The pot is called an "L-Pad". It's design maintains the proper amount of impedance to prevent amplifier damage. It should also be rated for the...
I was involved with a brand new sportfisher that wouldn't come up to rated speed/RPM. The props came off and were reworked multiple times....
It could be that some strands inside the group broke when the extreme bend was made. When needing to shape heavy cable in tight spaces or areas...
I shopped for insurance when I first became licensed. The broker, a large, well known yacht insurance brokerage in the area as well as in the...
If it's not water-clear in the can; it will add color. Some varnishes are amber colored in the can, like Schooner Gold, and some are very dark,...
I like cradle mounts for rewiring jobs. You can support the wiring harness with loose wire ties as you remove tape and dead ends. As you progress,...
As MYTraveler says, you can get dirty fuel, but that can happen anywhere I've never had it happen in Turtle Bay, but others have in the past. I...
The comments about distances to fuel are pretty close, and the stops for diesel are Ensenada, Turtle Bay, Magdalena Bay and finally Cabo. I've...
Nothing on the immediate horizon,, I do it with a minimum of three competent helmsmen, with my own crew and also with a number of owners with...
I've done it many times, from a 40' Searay San Diego to Acapulco, to several yachts to 82' from San Diego through Panama. I've stopped at just...
You may be able to reset DTC's by simply disconnecting all power to the engine circuits for a short while, and I should have mentioned that it is...
