^ What Mark said, look for the plugs and you have to dig them, or drill them out, to access the screw heads.
Contact Viking directly, they stock it in their parts department. Just mention you need window glazing.
Look for wooden plugs. There are screws behind them. I have a frame at home I took down and can post a pic later for you if this doesn’t make sense.
Shafts should be 1.5”. Rudders 5”. Trim tabs 2.5 or 3”, either should be fine. Bonding plate on back of boat 6x12”. Engine exchanger for crusaders...
awesome thank you!
Thank you. I do have the wiring diagrams. Didn't click what this was doing. Simple enough circuit, using the fluid as the conductor. kind of...
Looking closer at my tank top as I've been replacing the hoses, it looks like the top plate is actually plastic. I'm not sure though. So I...
Thank you. I need to learn how senders and gauges all work. So you buy something like that, and then just make sure you buy a gauge that matches...
Thanks guys. I'm not following the probe setup JustOld. How did it work? You mentioned two probes, I assume the other is the other bolt I can see?...
Looking for some ideas. I noticed, when working on my holding tank hoses this weekend (1989 35 convertible), that the reason the "Do Not Flush"...
I made some really good progress this weekend, finally. First I located the top of the holding tank and the related hoses. No signs of anything...
I looked for the holding tank in the galley hatch. No way to get to it. I can get some pictures. It seems to be lower than the subfloor in the...
Thank you. There is a pump in the head and a separate macerator pump for overboard discharge from the holding tank. You can also pump directly...
Thanks. I had a buddy go in and take some pics of the head, hoping they would help. I'm a bit disgusted of the close ups, as the thing looks...
Thank you, this is very good info! I was on the boat this morning, poking around, and was stumped trying to get access to the holding tank....
Thanks for the rod holder tip. I’ll get some Pics tomorrow. On the holding tank I’m pretty sure I have a clogged vent. Toilet wouldn’t suck down...
Thanks. Looking forward to trying it. So keeping all my questions in one place, :), what are you guys doing for rocket launchers on these boats,...
Great, thanks! And this liquid plumber doesn't pose a risk to the hoses? And you mean this stuff?...
I poured water from bottles down the shower drain, and definitely wasn't getting a good stream out of the boat. More like a slow pour than a...
Thanks! I did clean out the show sump. It was a mess, and the screen had a science experiment in it. It was rarely used if ever in the last 10...
