Tell Richard I say hello. Are you doing the entire vessel or just the hull?
Got the masthead anchor light dialed in on the 2nd go around. Given the need to be above my red and green lights which are in the hardtop corners...
I ran my block heaters this winter and it was sure nice having a toasty engine room. But my power bill was rather high and mechanic said that...
All makes sense. Built 2006 and sold as 2007 model year. Friend had a 2005 53. Good boat. Fished it a bunch.
Yes
Veems are fast and very good props. My 48 has a set of 5 blade Federals and 4 blade Veems. Last owner never ran the Veems as he liked the lift the...
Splendide Combomatic. Can't recall model off top of my head. Nice to have and hope it proves reliable.
I have one on the 48. I got about 12 uses out of it and it went dead during use. Drained it and sucked water out with shop vac. Took clothes to...
To further confuse things Cabo shipped boats without a hard top and that was specd and built by delivering dealer. Cabo wired everything up and...
So it appears I am correct in my interpretation that to cover my bases I need to mount my masthead light as the highest point of the vessel and...
How strictly enforced and what are the clear rules for Navigation lights on power boats over 39ft and less than 65ft. I am replacing the masthead...
I just removed a pair of AC powered antiquated spreader lights on my 48 Cabo and installed a Lumitec DC LED spreader light. A bit of rigging...
I was picking boat by the 3 point from Novurania and using math for line lengths they provided. Didn't think about with no engine math changed a...
Wes @ Dueck is the Novurania distributor for NW. He is in British Colombia. Good guy. I bought a new 550DL from him and rigged myself as I...
Cabo may have provided that for tower leg should a tower be installed after delivery.
I believe that is a 50 Viking and one of only a few built with integrated stairs. Only production builder I know of that offered integrated...
My 48 Cabo has a 11.5 degree transom deadrise. I don't get to 20 degrees until just fwd mid ships. Where my transducers are mounted just ahead of...
Feels like silicone.
With the 4 screws if you set the fishboxes on some type of gasket and didn't use silicone or caulk it would be easy to remove. It is all the...
Each box has 4 screws. One in each corner. Remove them as well as macerator pump hose. Remove fish box lid hardware inside lip. Razor knife as...
