Removed pump today and appears upon further inspection pump was a 2012 model year. The 06 I saw referenced sub model of pump. Now trying to...
Came down to the boat to test theory. With white wire L2 going to motor disconnected the breaker turns on and does not trip. Darn. [ATTACH]...
If all my ac units are off at the panel and when I turn on ac pump breaker it causes my main shorepower breaker to trip what in this box could be...
Will start here and investigate. Thanks. Gut still says pump. [ATTACH]
The pump operates all 3 of my units. Yes if all are on and just pushing air but not actually producing heat or ac then the pump will be off but...
Yeah. I know your right. Don't mind doing so but the tear down to get there is gonna suck and that will lead to a lot of other "opportunities."
[ATTACH] [ATTACH]
I presume this is as bad as I think it is. Went to boat this am to have an office day on the boat and when I went to turn on AC breaker it tripped...
DailyMail needs to have a boater on retainer to fact check. 4 docks may pass spell check but I think they meant 4 decks from their cut and paste...
Yup...Will be using local hydraulic shop in future for ZF o rings. Just need manual. This shop is very well known in the ZF world and they have...
Doing some maintenance on my gear coolers this offseason and will need the manual for this removal. Also I was replacing a couple o rings on oil...
Any pics? Ask them who sprayed your boat. My guess Freddy.
Not sure in a bag it can read thru coring. Finding space for ducer and not to sit flat just stbd and with access is the challenge. But if you can...
That is on a 550DL. What size do you have?
I just went out to shop and measured. 19 inches forward of transom. 4 inches off centerline to starboard side. Protractor app on phone indicates...
I have Furuno 12 inch TZ Touch 2 on Novurania. The B60 is a well known ducer especially on smaller boats. Built by Airmar and works with all...
Cored hull. I rigged my 550DL myself. Installed a B60. [ATTACH] [ATTACH]
Polyform balls with polyform covers when traveling. In boat shed Taylor Made rollers with Cape Hatteras fleece covers. Still getting used to paint.
Hull only should have you in and out of there pretty quick. Richard is a good guy as is his crew. Good luck with George.
Yes they painted my Cabo waterline to hardtop.
