There have been no issues related to the extra horse power upgrade that has been done to the C32 ACERT. You seem to be prepared for the...
Those temps are normal for 3126B engines. Edit for specs: The regulator (thermostat) is not fully open till 208 F
I have been on a vessel that has used exhaust injected into the prop during acceleration to aid it in achiving plane. this allowed them to use a...
EGT= Exhaust Gas Temp JWT= Jacket Water Temp (coolant)
I know its been said already but, Very strange for both engines to have the same problem. I would suggest checking coolant glycol concentration...
on a 3208 fuel injection pump there is a check valve on the fuel return side that maintains fuel pressure in the system. this check valve should...
The combined fuel burn of 46 GPH indicates you are running the engines at a light load. Aprox 50%. I would say you are getting a decent speed out...
since it looks like the boats there are the only things worth salvaging why not patch the holes and wait for the next tsunami
dimensions and weight Preliminary information I have access to says weight 1510 Lbs length to flywheel housing 38.4 in width 39.2 in...
here is the press release
Oh wow. If I had the money i would buy it just for the memories I have on that boat.
ELC is a very good product it has a life of 6 years with regular sample analysis and an extender added at 3 years. ELC provides better metal...
I have seen companies that use this or a similar product to clean the raw water side of the cooler/heatexchanger with much success. But it does...
I dont see why you would have to force them to remove the aftercoolers for cleaning it is a maintenance item and you will be paying for it. I am...
the water side will not effect performance and your loss of rpm. You should get 2410 RPM no load if your control system is requesting 100 %...
I voted for t shirts. It would be the best way to promote the site on the docks. I might even run into a few of the forum members that way. :)
The display does show the arrows for the feature but it is not available with all ecm's for this to be done over the data link that the display...
The aftercoolers are due every 1000 hours along with the other coolers, heat exchangers and turbo's as well as valve adjustment and injector...
It may come up sooner than that, unless prior arrangements have been made with the engine manufacturer. These days warranty is automatically...
there usually is another place hidden away beside the transom that has the original hull number the manufacturer should be able to tell you the...
