They recommend that you use alcohol mix of at least 60% to disinfect, that's 120 proof ,no beer the kids got to hit the real hard stuff !!!
There shouldn't be anything alive on the evaporator ,drain pan or in the condensate line. Use a foaming, self rinsing, bio-degradable evaporator...
Aluminum has a higher reflective index (great for polishing) than any other metal ,as long as it's not cast aluminum. If you want them to look...
So where is the boat now ? It's over six months older now, in climate controlled storage or bobbing around in the sun and salt ?
Is there any software available to run on YFs server end that could resize any size photo sent from a cell phones or PCs down to the YF standard ?...
This is a couple questions; lets just say your new boat is either Italian, German,Chinese or French built ? Would language difference's in law...
I would absolutely never ever clean dip and bake as a repair. Here's why, all windings are wound tightly with pre-insulated copper wire. There is...
I seen that also , but even if it was running on concrete travel ways ,there is no benefit for the lift to come off plumb & level. I can think of...
It would be real interesting if one could get the raw data on engines ,rudder position, throttle position ,RPM , heading and time in forward &...
Keep in mind when you buy double , triple or quadruple V belts , they come in "matched sets" you don't just buy 2 with the same part number.
I would stay with V belts and find a double V pully. Reason; you could keep existing alternators as a spare/emergency part in case one of the new...
This was not caused by electrical voltage ,watts or frequency. Steam is compressible, water is not. For this to happen , 1: There is not a...
You MUST use closed cell insulation. If you put the insulation in water and it soaks it up like a sponge and you can ring it out, its open cell...
Tin tabbed Lock washers only lock if half the tabs are bent forward and half backwards , so each nut is engaged.
Prussian Blue ink ( I use Permatex) should be applied, the prop seated on the taper then removed to "Read" the ink. places of contact turn silver,...
I would bet that's a piston pump head off a pressure washer. Nothing wrong with that .
Armed with some minimal proof, Like a boat trade, payments already made I would hire a lawyer to ask a judge for a temporary injunction. That...
Where does the water go ??? That is just a 38 watt heating element . 1 watt equals 3.412 btu so that unit adds ~130 btu's of heat a hour....
I would just take one apart to inspect their special manifold.
On page 1 of the pdf there is a hint, it say operating temperature is -30 c to 40 c that's -22 f to 104 f for us USA folk. The brass ,glass,...
