I'm planning to replace mine with 316 stainless this year. Marine Now was one of the vendors I looked at but I'm still waiting on one more quote.
The stop lever on a 671 is on the governor. On mine if you kill the ignition first the fuel shutdown solonoid won't get power when you push the...
We run all our 671's 1/2 gallon low for the same reason. I run my 6v92's almost a gallon low and don't have to add oil between changes.
I would start at the solonoid with a meter and work backward toward the start switch with the switch in the start position.You'll need a helper...
I feel you can jump across the the solonoid and start it , you don't have a battery problem?
Chris Craft antique boat owners association is probably still alive and all the original drawings are at the mariners museum in Norfolk. I've...
I've never run a 43 but I spent a few hours on an early 42' and have put about 800 hours on a 93 46' which I have owned for a few years with no...
I've never seem a sealed bell housing on a gasoline engine. If you seal it and one of the rear freeze plugs leaks you'll end up presurizing the...
I've not spent much time on center consoles but there are a lot of Sea Hunts in our neck of the woods. I've been out on a 30' with twin 300...
Based on the photo, you don't have enough shaft to shorten.
I got my a$$ chewed out going under Circus bridge close to Tampa on one engine in and out of gear for going too fast. When I explained that I had...
Correction...R12
