Problem is that you'll need a marine electrician to review and write his summary to be shared with the surveyor and obtain a corrected article....
Thank you, because this is where my interpretation was going...all that travels from boat to dock are the lines and the ground. Once aboard...
true. Or when you’re running with your props in the air.
Upsizing one pool is probably a good direction. But you may not need it. Test first. 200 for me might be overkill by some percentage. What you...
I did similar. Pulled pool into tightest position, marked it, dropped and added stainless angle shorts to two places to stabilize it. Really...
That 200 pool with 1/2” chain allows me to sleep very well at 68’/65 ton. It was a terrific upgrade for me.
What you’re seeing with large vessels using multiple anchors and lines is about both anchoring and maintaining a perspective of site lines for...
Agreed. We used several coats of gloss and developed depth of finish before topping with satin.
Need to run a sample finish on a scrap to verify color and shine desired. Make certain any product you use has UV inhibitors to help maintain...
Safe into port this morning in Mobile. Two days ahead of schedule. Apparently she's still quite fast.
I haven't been as fortunate. Outcome is that I developed a plan to handle it as well as to hopefully avoid it.
But this is my setup...started with an electric pump to use for priming all of the engines. Discharge needed a manifold to direct fuel to E1, E2,...
Fuel polishing should be an easy and "mandatory" addition to any system. Polishing filtration systems can be used for all fuel transfers tank to...
Really glad I got to see her in person before she left Philly.
I'll add, if you have multiple tanks, and your use limits your consumption to a point where you don't turn your fuel inventory, then you should...
Yeah, that's the ticket. It's not as important to make 750 in 24 hours. It's more important to be able to make 50+ gallons in a hurry.
The davit sits on a post that extends down to the hull outboard stringer. It doesn't apply any weight to the deck area. My play here would be...
Ive seen 1000 to 1500 pound tenders up there with no issue, and they sit on cradles whereas a bladder would spread its load over the entirety. If...
It's kinda crazy to think that I need to step power up from DC to AC with a transformer just so that the led bulbs can properly dim...
I served the circuits with 24v DC. My next step was to swap to 12v bulbs and install a small sept down 24-12 for the circuits. The Vimar...
