Click for Cross Click for YF Listing Service Click for Abeking Click for Westport Click for Perko

Hydraulic steering issues

Discussion in 'Ocean Yacht' started by Tylerloom, Oct 2, 2024.

You need to be registered and signed in to view this content.
Page 2 of 2
  1. Pascal, Oct 3, 2024
    #21
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,563
    Location:
    Miami, FL
    Try with the tie bar connected to make sure it’s not binding there.

    This reminds me that we had a similar issue on the 84 Lazzara I used to run. It was only happening when turning to port. In sharp turns I d turn the wheel and nothing would happened until pressure built up and the rudders would suddenly jump. We checked a number of things incl disconnecting the rudders. The boat sold before we could figure it out. It was power assist hynautic.
  2. DOCKMASTER, Oct 3, 2024
    #22
    DOCKMASTER

    DOCKMASTER Senior Member

    Joined:
    Feb 26, 2012
    Messages:
    1,503
    Location:
    Ketchikan, Alaska
    I had the same system on my 54’ Sportfish. Never had any issues with it but glad I got rid of it and upgraded the whole system. I went with the big SeaStar 24v HPU unit with a new helm and new ram. It works fantastic and I have power steering regardless of which engine I’m running without having to have pumps on both engines. This is a plus for me as I’m often trolling on just one engine.
  3. Capt Ralph, Oct 3, 2024
    #23
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,485
    Location:
    Satsuma, FL
    I was hoping you would chime in brother.
    I remember some of your thoughts during your re-power.
    Glad you still are having fantastic results.
  4. Donzi 54, Oct 3, 2024
    #24
    Donzi 54

    Donzi 54 Member

    Joined:
    Oct 21, 2009
    Messages:
    169
    Location:
    Point Pleasant, NJ & Morehead City, NC
Page 2 of 2