Click for YF Listing Service Click for Ocean Alexander Click for Westport Click for YF Listing Service Click for Abeking

Prop Guard by FSI for Props

Discussion in 'Props, Shafts & Seals' started by Fletcher500, Feb 15, 2017.

Page 2 of 2
  1. Capt Ralph, Feb 18, 2017
    #21
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,603
    Location:
    Satsuma, FL
    Then that's da plan. Keep us up in mid term inspections please.
    What out of water life does the treatments have?
    Probably a couple of years before the competition really gets heated up.
    Probably a couple of years before I can afford any treatment any way.
  2. Capt J, Feb 19, 2017
    #22
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,594
    Location:
    Fort Lauderdale
    On your personal boat, your best bet is to go with Tri Lux white on the running gear, the material is not that pricey and it works and lasts REALLY well on boats that cruise under 20 knots.
  3. Capt Ralph, Feb 20, 2017
    #23
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,603
    Location:
    Satsuma, FL
    We have been having fun with an epoxy primer and different Vivid colors.
    It's off the wheels by the years end but offers some protection to the shaft for a lil longer.
    Diver under the boat monthly so there is really no worries.
    With the silt in our area and shallow operation, Nothing is going to last for us.
  4. Capt J, Feb 20, 2017
    #24
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,594
    Location:
    Fort Lauderdale
    I don't think the Tri Lux is expensive. I think it's pretty cheap but made just for running gear. I got 15 months out of on a 58' Hatteras YF before it started wearing off.
  5. Fletcher500, Mar 7, 2017
    #25
    Fletcher500

    Fletcher500 Member

    Joined:
    Feb 1, 2017
    Messages:
    74
    Location:
    San Diego
    Dropped off the props at the shop yesterday for the teflon prop guard application. I will get them in a couple weeks, and on they go at haul out in April. I'll post some pics soon.
  6. Fletcher500, Mar 21, 2017
    #26
    Fletcher500

    Fletcher500 Member

    Joined:
    Feb 1, 2017
    Messages:
    74
    Location:
    San Diego
    Coated with Prop Guard.

    Attached Files:

  7. Fletcher500, Mar 21, 2017
    #27
    Fletcher500

    Fletcher500 Member

    Joined:
    Feb 1, 2017
    Messages:
    74
    Location:
    San Diego
    If you click on the picture, the whole photograph will open up showing two props.
  8. YachtForums, Mar 21, 2017
    #28
    YachtForums

    YachtForums Administrator

    Joined:
    Dec 22, 2002
    Messages:
    20,642
    Location:
    South Florida
    I resized that prop pic. In the future, please reduce images to 800 pixels before uploading.
  9. Fletcher500, Apr 14, 2017
    #29
    Fletcher500

    Fletcher500 Member

    Joined:
    Feb 1, 2017
    Messages:
    74
    Location:
    San Diego
    Props are on, and she is back in the water. Time will tell.
  10. Capt J, Apr 14, 2017
    #30
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,594
    Location:
    Fort Lauderdale
    Does it perform the same with them? WOT RPM and Speed?
  11. Fletcher500, Apr 15, 2017
    #31
    Fletcher500

    Fletcher500 Member

    Joined:
    Feb 1, 2017
    Messages:
    74
    Location:
    San Diego
    Couldn't confirm that yet. Had some other issues so limped from the yard, back to the marina. Will do this soon.
  12. Fletcher500, Apr 20, 2017
    #32
    Fletcher500

    Fletcher500 Member

    Joined:
    Feb 1, 2017
    Messages:
    74
    Location:
    San Diego
    Sea trailed. All parameters the same.
Page 2 of 2