Click for Westport Click for Mulder Click for Perko Click for Burger Click for Burger

Bridge curtains

Discussion in 'General Yachting Discussion' started by Boomer, Nov 13, 2018.

You need to be registered and signed in to view this content.
Page 2 of 2
  1. alvareza, Nov 15, 2019
    #21
    alvareza

    alvareza Senior Member

    Joined:
    Aug 20, 2010
    Messages:
    145
    Location:
    Scituate MA
    I need to replace cracked center front panel currently ez2cy. Got a price using polycarbonate which I read online often has distorted light especially with polarized sunglasses. Clear vinyl (strataglass) seems good for the roll up side curtains.

    What’s the best material option for the center front panel on a sportfish?
  2. Capt J, Nov 16, 2019
    #22
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    I like SeaAcrylic then EZ2CY IF you have a flat place on the hardtop to attach it to in the open position and don't have to bend it when opening it. However, strataglass is not a terrible choice either.
  3. MBevins, Nov 16, 2019
    #23
    MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,225
    Location:
    Windsor On. Canada
    If you need only a a couple replaced you can just send/take the panel to any EZ2CY / CLEAR2SEA dealer and they'll make you a replacement .
  4. Beau, Nov 17, 2019
    #24
    Beau

    Beau Senior Member

    Joined:
    Jan 15, 2010
    Messages:
    2,261
    Location:
    Beaufort, NC
    I hose off with water hose and a a bottle of diluted boat soap squirted into the stream of water after every cruise. Creates a nice sudsy rinse. I do that for the decks, house and hull also. I think it really helps keep that EZ2CY scratch free, and the boat cleaner between washes. I use collinite on the stratoglass inside and out about 3 times a season.

    Even if I don't run the boat, I rinse it that way about once a week
    Last edited: Nov 17, 2019
Page 2 of 2