Click for Walker Click for JetForums Click for Furuno Click for Burger Click for Ocean Alexander

Detroit Diesel 6-71ti starting issue

Discussion in 'Engines' started by Posterboy91, Jan 23, 2019.

You need to be registered and signed in to view this content.
Page 2 of 2
  1. Posterboy91, Jul 30, 2019
    #21
    Posterboy91

    Posterboy91 New Member

    Joined:
    Oct 17, 2017
    Messages:
    27
    Location:
    Fort Lauderdale fl
    so I did this and the engine starts on the first crank. issue im having with the other engine now is that I can make full rpm out of gear but ounce the engine is under load im down about 350-400 rpm. I just had the props sent out and redone and changed the turbos out for new ones with no change. suggestions?
  2. Pascal, Jul 30, 2019
    #22
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,563
    Location:
    Miami, FL
    Throwing parts at a problem is a lousy way to diagnose an issue a good DD guy will likely solve quickly. Props aren’t going to cause a sudden 400 rpm loss unless they re mangled up.

    Start with the basics. Fuel filters (prim and sec), rack etc.
  3. Capt J, Jul 31, 2019
    #23
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,540
    Location:
    Fort Lauderdale
    Need to get a good Detroit Diesel guy out. But if the props didn't hit anything, the turbo's looked fine, you either have a bad injector or dead cylinder to lose 350-400 rpms usually.
  4. Pascal, Jul 31, 2019
    #24
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,563
    Location:
    Miami, FL
    If you had a dead cyl or injector, taking exhaust manifold temp with an IR thermometer will show you which one is not firing at 100%
  5. Capt Fred, Jul 31, 2019
    #25
    Capt Fred

    Capt Fred Senior Member

    Joined:
    Jun 22, 2009
    Messages:
    319
    Location:
    Long Beach CA
    The IR guns are cheap at Harbor Freight, about $20 and are a good tool to have on-board for trouble shooting.
  6. Boomer, Aug 6, 2019
    #26
    Boomer

    Boomer Senior Member

    Joined:
    Oct 14, 2017
    Messages:
    677
    Location:
    Seminole
    He said he had his props redone...did they change the pitch on them?
  7. Posterboy91, Aug 6, 2019
    #27
    Posterboy91

    Posterboy91 New Member

    Joined:
    Oct 17, 2017
    Messages:
    27
    Location:
    Fort Lauderdale fl
    yes they were changed from 24x26 to 24x24
  8. Boomer, Aug 6, 2019
    #28
    Boomer

    Boomer Senior Member

    Joined:
    Oct 14, 2017
    Messages:
    677
    Location:
    Seminole
    Scratch my thought...if you went the other way, that would have caused your issue
  9. Capt Ralph, Aug 6, 2019
    #29
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,486
    Location:
    Satsuma, FL
    You kids are on this.
Page 2 of 2