Click for Northern Lights Click for Burger Click for JetForums Click for Delta Click for YF Listing Service

12 V92 Ta's and DDEC, no throttle in gear on one engine..

Discussion in 'Engines' started by captsam54, May 27, 2012.

You need to be registered and signed in to view this content.
Page 6 of 6
  1. captsam54, Jul 27, 2013
    #101
    captsam54

    captsam54 Member

    Joined:
    Sep 30, 2008
    Messages:
    63
    Location:
    Somewhere in the Caribbean
    The owner was driving the boat... Took it out the pass and all was fine.... The Mechanic and his 2 helpers were in the engine room... None noticed the hose blow off etc. as it was on the outboard side... I would have at least seen all the water running into the bilge... He ran it up to 1800 RPM's for less than a minute when it went to hell.... He said he was going to call me in for this.. but didn't..... So Now I am looking for Manifolds..... Any suggestions besides RPM diesel??? We would like to find surplus....thx....
  2. Capt Ralph, Jul 27, 2013
    #102
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,486
    Location:
    Satsuma, FL
    Sorry for the bad news.
    If I remember, 12/92s could use a variety of exhaust manifolds.
    Are they tapered cast manifold like a 12/6-71 or logs with end caps on both ends?
    Part number or picture would help.
    I'm always looking for 12v71 spares for a friend and myself and trip over 92 stuff.
    Found a running 1-71 genset (10kw) on e-bay the other day. People went on a bidding war on that one.
  3. captsam54, Jul 27, 2013
    #103
    captsam54

    captsam54 Member

    Joined:
    Sep 30, 2008
    Messages:
    63
    Location:
    Somewhere in the Caribbean
    Here are the Manifolds off one side... (2 8V92's bolted together) and a cracked elbow. and part Numbers off the Manifolds...

    Attached Files:

  4. Capt Ralph, Jul 27, 2013
    #104
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,486
    Location:
    Satsuma, FL
    Yep, the 92 logs. I'll start hunting. You need Miami or ?? Delivery?
  5. Capt J, Jul 27, 2013
    #105
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,540
    Location:
    Fort Lauderdale
    Try Western Branch in Norfolk, VA. They've been a DD dealer for a very long time. Looks like you have Steward and Stephens 12v92's
  6. captsam54, Jul 28, 2013
    #106
    captsam54

    captsam54 Member

    Joined:
    Sep 30, 2008
    Messages:
    63
    Location:
    Somewhere in the Caribbean
    These are 16 V 92's... I have a better picture somewhere.. These are Balanced and Blueprinted "Roger Penske" engines.... And the Boss has informed me he has found them in Lauderdale for a grand a set... OK....

    Attached Files:

  7. weto, Jul 28, 2013
    #107
    weto

    weto Senior Member

    Joined:
    Jan 1, 2012
    Messages:
    163
    Location:
    NOR CAL
    My stomach aches after reading that story.
  8. K1W1, Jul 28, 2013
    #108
    K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,429
    Location:
    My Office
    Hi,

    I should think that Owners Wallet aches as well after being a part of the story.
  9. captsam54, Jul 29, 2013
    #109
    captsam54

    captsam54 Member

    Joined:
    Sep 30, 2008
    Messages:
    63
    Location:
    Somewhere in the Caribbean
    He is not Happy......... But he has been doing this on the cheap for so long.. U know the old saying about worrying about pennies and loosing dollars... And it's not like he does not have money....
  10. weto, Jul 29, 2013
    #110
    weto

    weto Senior Member

    Joined:
    Jan 1, 2012
    Messages:
    163
    Location:
    NOR CAL
    From the sounds of it he's got the first nickel he's ever made. ;)
  11. captsam54, Aug 17, 2013
    #111
    captsam54

    captsam54 Member

    Joined:
    Sep 30, 2008
    Messages:
    63
    Location:
    Somewhere in the Caribbean
    Nice guy.. became a friend over time.. But he does as he does..... I try to help out.... He is being quiet now.. I guess tying to figure it out on his own.. Found the manifolds in Lauderdale for a decent price.... I have not heard from him lately.... I am doing Divemaster training in Bayahibe DR. for a few months waiting for season.....
Page 6 of 6