Click for YF Listing Service Click for Northern Lights Click for Mulder Click for Delta Click for Ocean Alexander

Under water sq ft 355

Discussion in 'Carver Yacht' started by seldomdry, Apr 10, 2014.

You need to be registered and signed in to view this content.
  1. seldomdry, Apr 10, 2014
    #1
    seldomdry

    seldomdry Member

    Joined:
    Oct 10, 2012
    Messages:
    79
    Location:
    Stillwater MN
    Im having my hull blasted nxt week. Any one know under water sqft ? Need to order some Interlux soon.

    THX
  2. NYCAP123, Apr 10, 2014
    #2
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,208
    Location:
    Long Island, NY
    Doubt there's any way to measure it, including up to your water line, your prop pockets, the spots under the jack stands you'll need to save paint for, plus recover for any daylight spots found as the paint dries, without a major computer program. Just multiply the LWL by the beam and you should come close enough.

    BTW, if you're talking about a DIY project most yards won't permit it anymore because of pesticide regulations. Be careful with what blasts off and what you drip. Some municipalities can be fairly strict.
  3. seldomdry, Apr 10, 2014
    #3
    seldomdry

    seldomdry Member

    Joined:
    Oct 10, 2012
    Messages:
    79
    Location:
    Stillwater MN
  4. ddw1668, Apr 11, 2014
    #4
    ddw1668

    ddw1668 Senior Member

    Joined:
    Jan 18, 2007
    Messages:
    133
    Location:
    Murrells Inlet, SC
    Pettit paints has a calculator on their website that is fairly accurate for estimating bottom paint volume.