Click for Ocean Alexander Click for Perko Click for Mulder Click for Abeking Click for Abeking

Synthetic teak- which ones seem to be the best

Discussion in 'Technical Discussion' started by Capt J, May 6, 2014.

You need to be registered and signed in to view this content.
  1. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    I have a yacht I manage that the owner wants to replace the thin teak deck with a synthetic teak deck for less maintanence. He currently is considering Flexi-Teak and Bogantech. I have gotten quotes for both, but the material is significantly different between the two products. I have little experience with the synthetic teak, except for one yacht I run occasionally that went with Flexi Teak over 2 years ago and it's not showing any signs of wear. The boat being considered, the teak sits exposed to full sunlight all of the time and is not in the shade at all.

    What's everyone's experiences with either product? Is there another product that is better quality than both of them?
  2. K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,427
    Location:
    My Office
    Hi,

    I am under the impression that all synthetic teaks get very hot in the sun and can actually burn skin.
  3. SeaEric

    SeaEric YF Historian

    Joined:
    Jan 28, 2007
    Messages:
    1,372
    Location:
    out on the dock
    For Flexiteek, if you look at the back of the color sample piece of the material - that is the (darker) color that it will eventually become in time. They have some lighter colors now. I would advise that you get some samples and lay them out in the sun and see what you think of the heat factor. I'd also look at Plasdeck. I like their colors better.
  4. water-baby

    water-baby Member

    Joined:
    Dec 22, 2012
    Messages:
    105
    Location:
    Wabasso, FL
    I would stay away from Bogantech.


    And this is why: I was looking at them at the Miami show and got a sample
    I also got samples from plasdeck< I let them sit out in the sun and weather and after about 1 month the Bogantech came apart! im not sure if it would make a difference if it was glued down or not but from wat I've seen I would be afraid to find out.

    The plasdeck still looks good as new.

    as for plasdeck I have it in the Head and like it, plan on installing in cockpit
    when funds allow
  5. maldwin

    maldwin Senior Member

    Joined:
    Sep 20, 2009
    Messages:
    341
    Location:
    Dark Harbor Me/ Hobe Sound Fl
    While I vastly prefer real teak, Estech is the best looking synthetic I have seen. It is original equipment on Zeelander and Van Dutch boats, and I think there it may be owned by the same company.
    Best,
    Maldwin
  6. Norseman

    Norseman Senior Member

    Joined:
    Feb 24, 2005
    Messages:
    3,110
    Location:
    Ft. Lauderdale
    I went with cork on the Duffy.
    Probably more expensive and labor intensive than faux teak, but it has been around for 15 years + and holding up well, or so they say.

    Looks good but not sure I would do it again @ 2 x the cost :rolleyes:
  7. JWY

    JWY Senior Member

    Joined:
    Feb 22, 2004
    Messages:
    1,567
    Location:
    Ft. Lauderdale
    I had posted on Marinedeck 2000 previously. It is a cork epoxy composite and I have had experience with many yachts with this application, both interior and on all exterior decks. It is the coolest synthetic my bare feet have walked on and it resists stains, breakage, is low maintenance, and has held up extremely well.

    Judy
  8. Norseman

    Norseman Senior Member

    Joined:
    Feb 24, 2005
    Messages:
    3,110
    Location:
    Ft. Lauderdale
    Glad to hear that Judy, and yes that is the stuff I had installed on the Duffy.
    The shop gave me bogus estimates and the price kept going up.

    Should have gotten a firm estimate in writing, but being a causal and friendly guy, I did not, serves me well :rolleyes:
  9. TeKeela

    TeKeela Member

    Joined:
    May 1, 2012
    Messages:
    151
    Location:
    NC & Puerto Rico
    Fake teak costs as much as real teak, just no maintenance. Flexi now has some new colors from the freshly sanded to the bleached to the weathered. I personally like the "scrubbed" with white caulk, it will go onto a refurb center console this year. Looks like I just cleaned the real thing but doesn't look fake.

    I'd never use anything but the real deal in a sportfish cockpit, other boats, sure, why not, but it is as expensive as the real thing, at least from the prices I got.
  10. K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,427
    Location:
    My Office
    The man made ones can take a lot more abuse and keep on looking good for longer than the real thing from what I have seen and heard.
  11. dainisk

    dainisk Member

    Joined:
    Jan 15, 2007
    Messages:
    62
    Location:
    Perth, Fremantle
    A few boats around here have the cork based Marinedeck 2000 in the cockpit and it seems to have held up quite well over 10 years, except for the caulking. By the way, don't use black caulking outdoors as it will burn your feet. The only complaint I've heard is that if you spill fish guts on it, it becomes slipperier than an ice rink. All the plastic based imitation teak products are dangerous in the full sun. I'm in Perth/Fremantle and it gets quite hot here. A few have tried it, but since had it removed. You just cannot walk on it in bare feet. However, it would serve quite well indoors though, just don't put it outside.