Click for YF Listing Service Click for Furuno Click for Cross Click for Glendinning Click for Abeking

Sturdy engine controls - older Broward

Discussion in 'Technical Discussion' started by Capt Bill11, Feb 13, 2019.

You need to be registered and signed in to view this content.
  1. Capt Bill11, Feb 13, 2019
    #1
    Capt Bill11

    Capt Bill11 Senior Member

    Joined:
    Feb 27, 2006
    Messages:
    1,459
    Location:
    Sarasota/Ft. Lauderdale FL
    I’ve got an issue with my Sturdy engine controls on a 1997 Broward.

    The system comes on but I can’t take control at any of the stations.

    All I get is both the red “take command” light and the green “sync” light flash simultaneously at all stations.

    Anyone know what it’s trying to tell me?

    Of course I have no manual on board and so far I can’t find any answers on the inter web.
  2. Capt Ralph, Feb 13, 2019
    #2
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,442
    Location:
    Satsuma, FL
  3. wannapost50, Feb 13, 2019
    #3
    wannapost50

    wannapost50 New Member

    Joined:
    Sep 5, 2014
    Messages:
    17
    Location:
    Newport Beach, CA
    I would start with incoming voltage
  4. Capt Bill11, Feb 14, 2019
    #4
    Capt Bill11

    Capt Bill11 Senior Member

    Joined:
    Feb 27, 2006
    Messages:
    1,459
    Location:
    Sarasota/Ft. Lauderdale FL
    Worked through it with Sturdy.

    The “take command” button at one station is bad.

    Once I unplugged the lead for the bad one from the distribution box the other stations came back on line normally.

    Interestingly, when I first told them I thought I had a bad button at one of the stations they said that wouldn’t be causing the problem.

    Then when I told them the system was working correctly with the station with the bad button disconnected, they said, “yeah a stuck button could cause that”. !? :)