Click for YF Listing Service Click for Westport Click for Mulder Click for Perko Click for Cross

Non skid in the need of being redone?

Discussion in 'Technical Discussion' started by 47viking, Mar 21, 2009.

You need to be registered and signed in to view this content.
  1. 47viking, Mar 21, 2009
    #1
    47viking

    47viking New Member

    Joined:
    Mar 11, 2009
    Messages:
    19
    Location:
    New England
    Hello All,

    I have a Viking sport fish that needs the nonskid redone. Any opinions on which products should be used. The yard where the boat is at recommends awlgrip. Haven't asked what the price difference would be for teak, any thoughts between the two?

    Thanks
  2. Capt J, Mar 21, 2009
    #2
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    Re-painting the non-skid should be much cheaper. Last I heard, it was $130 per square foot to do a teak deck.
  3. 47viking, Mar 22, 2009
    #3
    47viking

    47viking New Member

    Joined:
    Mar 11, 2009
    Messages:
    19
    Location:
    New England
    that's about $17,500 looks like I'll be painting with some sort of grit.
  4. K1W1, Mar 22, 2009
    #4
    K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,427
    Location:
    My Office
    Hi,

    If you can get the Non skid sprayed.

    The overall finish will be a lot nicer and even that either rolling or brushing it.
  5. 47viking, May 9, 2009
    #5
    47viking

    47viking New Member

    Joined:
    Mar 11, 2009
    Messages:
    19
    Location:
    New England
    I went with getting it sprayed, It cost about $3,200. The marina is still working on it,I viewed a boat that the process done already, it looked better than factory non skid