Click for Cross Click for Mulder Click for Abeking Click for YF Listing Service Click for Furuno

Need to replace Priming Pump Fuel Decal

Discussion in 'Technical Discussion' started by CSkipR, Jan 28, 2020.

You need to be registered and signed in to view this content.
  1. CSkipR, Jan 28, 2020
    #1
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    The decal shows how to slide lock and the direction the handles should be in to Run or Prime. They were accidentally painted over and would like to replace. Any ideas?
  2. cleanslate, Jan 28, 2020
    #2
    cleanslate

    cleanslate Senior Member

    Joined:
    May 29, 2018
    Messages:
    1,661
    Location:
    Cherry Hill, NJ
    Maybe save them? By taping off around the decal or not, by rubbing decal with Lacquer thinner and rag or Acetone to carefully remove the paint only.
  3. CSkipR, Jan 28, 2020
    #3
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    They were painted over and when I tried to remove the paint with acetone it removed the lettering of the decal.
  4. Oscarvan, Jan 28, 2020
    #4
    Oscarvan

    Oscarvan Senior Member

    Joined:
    Nov 10, 2015
    Messages:
    969
    Location:
    Chesapeake Bay
    Take a picture of one, laminate.
  5. Capt Ralph, Jan 28, 2020
    #5
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,442
    Location:
    Satsuma, FL
    MAN decal? Call MAN and get a fresh one.
    Racor also.
    Print shops can make them also.
  6. CaboFly, Jan 28, 2020
    #6
    CaboFly

    CaboFly Member

    Joined:
    Aug 24, 2018
    Messages:
    270
    Location:
    Seattle
    Skip- The fuel priming pumps on my Cabo are Reverso. I would look at their website or give them a call.
  7. Beau, Jan 28, 2020
    #7
    Beau

    Beau Senior Member

    Joined:
    Jan 15, 2010
    Messages:
    2,261
    Location:
    Beaufort, NC
    You could also take a rendering to a local decal shop and have one or two made. Dunno what the cost would be? Maybe the net offers some opportunities too? Also add a diagram to your on board manual for reference.
  8. d_meister, Jan 29, 2020
    #8
    d_meister

    d_meister Senior Member

    Joined:
    Mar 4, 2010
    Messages:
    481
    Location:
    La Conner, WA.
    Print your own on 3M dual purpose transparency film at home. 3M CG5000. I've printed on the film in reverse with a color ink jet printer at home, spray painted a background on the image side, then glued the thing down with either double-stick tape or spray adhesive. The reason to do it in reverse on the adhesive side is that many home printer inks are water soluble.
  9. CSkipR, Jan 30, 2020
    #9
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Thanks I got the decals through Cabo Yachts old printing company they used in CA many years ago.