Click for Perko Click for JetForums Click for Burger Click for Northern Lights Click for Walker

MAN R6-800 Starboard throttle no command indication

Discussion in 'Engines' started by Helmi Rahman, Jul 25, 2019.

You need to be registered and signed in to view this content.
  1. Helmi Rahman

    Helmi Rahman New Member

    Joined:
    Jul 25, 2019
    Messages:
    3
    Location:
    Cambodia
    Hi,

    My boat recently had a lightning strike and since then my starboard engine is not able to see any reading and take command on throttle.

    I hav change the ECU, MPC, SFFR and even a new throttle however it is still the same.

    Anybody has experience this and knows if there is other Terminal board in the engine room that requires checking?
  2. CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Did you check the fuses on the top of the engine? On mine there are 3.
  3. Helmi Rahman

    Helmi Rahman New Member

    Joined:
    Jul 25, 2019
    Messages:
    3
    Location:
    Cambodia
    Hi there,

    I have checked the fuse it is well. I need to know if the common ignition has anything to do with the engine monitor and throttle command.
  4. CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    I can say on mine if the ignition will not come on neither will the engine monitor or throttle command. Have you checked the emergency button on the front wall of the engine room. The red or black round knob.
  5. Helmi Rahman

    Helmi Rahman New Member

    Joined:
    Jul 25, 2019
    Messages:
    3
    Location:
    Cambodia
    Yes i have checked the red knob. And my engine can actually start just that the monitor screen and throttle unable to command
  6. CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    I’m sorry beyond my knowledge.