Click for Westport Click for Ocean Alexander Click for JetForums Click for Cross Click for Furuno

Help! Spare part for Furlex 200S needed....

Discussion in 'Technical Discussion' started by Keelbolt, Feb 4, 2015.

You need to be registered and signed in to view this content.
  1. Keelbolt, Feb 4, 2015
    #1
    Keelbolt

    Keelbolt New Member

    Joined:
    Feb 4, 2015
    Messages:
    3
    Location:
    Wells, England and Bangkok, Thailand
    Can you help? I am looking for a locking block and associated screw / nut for the line guide on a Furlex 200S which went AWOL during a recent bearing service. I've attached a picture. If anyone can help, please email r.p.thomas at outlook dot com and I'll be very grateful!

    Attached Files:

  2. MountainGuy, Feb 5, 2015
    #2
    MountainGuy

    MountainGuy Member

    Joined:
    Mar 5, 2009
    Messages:
    140
    Location:
    Austria
  3. Keelbolt, Feb 5, 2015
    #3
    Keelbolt

    Keelbolt New Member

    Joined:
    Feb 4, 2015
    Messages:
    3
    Location:
    Wells, England and Bangkok, Thailand
    MountainGuy, you're dead right! Amazingly Furlex keep spare parts for this ancient bit of kit. Thanks. I'll try to add 'problem solved' to the post.
  4. Keelbolt, Feb 5, 2015
    #4
    Keelbolt

    Keelbolt New Member

    Joined:
    Feb 4, 2015
    Messages:
    3
    Location:
    Wells, England and Bangkok, Thailand
    PROBLEM SOLVED> Thanks folks.