Click for Burger Click for Ocean Alexander Click for Glendinning Click for YF Listing Service Click for JetForums

Finding engine hours on MAN display

Discussion in 'Technical Discussion' started by Capt J, May 5, 2012.

You need to be registered and signed in to view this content.
  1. Capt J, May 5, 2012
    #1
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,530
    Location:
    Fort Lauderdale
    Hey guys,

    I for the life of me cannot figure out how to find the engine hours on the MAN MMDS-LS CAN digital display for the common rails. This is the small digital display that has 5 lines for oil pressure/ water temp/etc and you scroll through the pages....and has 5 buttons on the bottom: alarm, page down, reset, program, and mute..........

    Anyone know the keys I need to press to find the engine hours?
  2. frozen tundra, May 5, 2012
    #2
    frozen tundra

    frozen tundra New Member

    Joined:
    May 5, 2012
    Messages:
    1
    Location:
    Green Bay Wi
    You cannot access engine hours on the MMDS LC displays. That is only available on the
    CLC 6.3 display. The boat builder should have installed an hour meter for the engine for easy read out. With the LC displays the only way to see engine hours was to have an external hour meter wired in or if you have the MAN software you can read engine hours from the black box. Kind of a dumb set up but thats then way it works, so dont waste you time pushing buttons, it does nothing.