Click for Abeking Click for Walker Click for Glendinning Click for Northern Lights Click for Furuno

Engine access Mariner 330

Discussion in 'Carver Yacht' started by Schewe0520, Sep 15, 2014.

You need to be registered and signed in to view this content.
  1. Schewe0520, Sep 15, 2014
    #1
    Schewe0520

    Schewe0520 New Member

    Joined:
    Sep 15, 2014
    Messages:
    2
    Location:
    North East, MD
    I have a 1993 Mariner 330 and I believe the neutral safety switch is bad on my port transmission (v-drive). Is there a way to access the transmission from inside of the salon to work on it. I was thinking I may be able to remove the stairs. Any ideas? I don't see how I can reach it from the engines deck access.
  2. seldomdry, Sep 15, 2014
    #2
    seldomdry

    seldomdry Member

    Joined:
    Oct 10, 2012
    Messages:
    79
    Location:
    Stillwater MN
    I got this from a other info site.

    The rear cockpit deck comes out completely by removing 8-10 screws, the base legs of the ladder steps and disconnecting the scupper hoses-took me all of 30 mins. to accomplish. Once the deck is out, you have wonderful access
  3. Schewe0520, Sep 16, 2014
    #3
    Schewe0520

    Schewe0520 New Member

    Joined:
    Sep 15, 2014
    Messages:
    2
    Location:
    North East, MD
    Seldomdry

    Thanks for the post. I may have to try that.
    The transmission sits back under the bench seat at my dinette in the salon. The bench has a 3" access hole that really only allows you to check the fluids. I have a generator that sits in between my engines. That only allows you a couple of feet to work space for anything forward.