Click for Delta Click for Abeking Click for Mulder Click for Perko Click for JetForums

CAT Display Trip Liter Resetting

Discussion in 'Engines' started by SOS, Dec 11, 2010.

You need to be registered and signed in to view this content.
  1. SOS, Dec 11, 2010
    #1
    SOS

    SOS New Member

    Joined:
    Nov 8, 2008
    Messages:
    14
    Location:
    El Gouna Red Sea Egypt
    Hi i have a problem resetting my Trip Litre on my CAT display, it says press left & right arrows to reset but doesn't work, life litre burned is working well, anybody can help me with this matter, thanks.
  2. Pascal, Dec 11, 2010
    #2
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,543
    Location:
    Miami, FL
    What engine/year?

    I have thecae issue with 2002 3412Es. I asked a cat dealer and Yhe software update was over $1000... I passed since I keep track of fuel burned in the log using the total burn data

    The other issue with fuel function is that once in while the lifetime total jumps up by a few thousand gallons. Annoying but again sicebi write down the totals daily it s not worth messing with the system
  3. SOS, Dec 11, 2010
    #3
    SOS

    SOS New Member

    Joined:
    Nov 8, 2008
    Messages:
    14
    Location:
    El Gouna Red Sea Egypt
    CAT C32 2004 Model, good idea to keep manual tracking, but would be better if the feature can work on its own, thanks.
  4. Capt J, Dec 11, 2010
    #4
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,524
    Location:
    Fort Lauderdale
    You cannot reset the trip fuel in the CAT computer with C32's, 3412's and I believe C30's. It is not built into the engine software from the factory. You can only reset the trip fuel on certain models like the C15, C18 and some others. It does however keep recording the fuel burned so you could keep a logbook everytime you take on fuel and do the math.
  5. SOS, Dec 11, 2010
    #5
    SOS

    SOS New Member

    Joined:
    Nov 8, 2008
    Messages:
    14
    Location:
    El Gouna Red Sea Egypt
    Thanks Capt J and Pascal i appreciate your feedback.
  6. Minnow, Dec 11, 2010
    #6
    Minnow

    Minnow New Member

    Joined:
    Feb 10, 2006
    Messages:
    29
    Location:
    Ft. Lauderdale
    I have used the trip feature on 3412E's, but with the consumer version of ET (electronic technician), a handy thing to have for diagnosing problems, checking alarm histories, selecting sea trial parameters, cylinder cutout tests, etc...
  7. CatTech, Dec 12, 2010
    #7
    CatTech

    CatTech New Member

    Joined:
    Sep 28, 2010
    Messages:
    56
    Location:
    south FL
    The display does show the arrows for the feature but it is not available with all ecm's for this to be done over the data link that the display uses. I am not aware of any software fix for this. But a manual switch can be wired into the CAT customer connector that will reset the trip totals. I have found many vessels with a extra wires already run up to the bridge that can be utilized for this and adding a momentary switch connected to ground. PM me for more details.
  8. SOS, Dec 12, 2010
    #8
    SOS

    SOS New Member

    Joined:
    Nov 8, 2008
    Messages:
    14
    Location:
    El Gouna Red Sea Egypt
    Thanks for your reply, i only have total fuel burnt from engine start, trip is not even working nor reset, got your point, many thanks.:)