Click for Westport Click for Burger Click for Ocean Alexander Click for Westport Click for Glendinning

Bertram hull design plan

Discussion in 'Bertram Yacht' started by Seadog, Jan 23, 2010.

You need to be registered and signed in to view this content.
  1. Seadog, Jan 23, 2010
    #1
    Seadog

    Seadog New Member

    Joined:
    May 31, 2009
    Messages:
    9
    Location:
    Port Alfred, South Africa
    Hi all

    I have a 1985 Bertram 38 Convertible, which I will be slipping out of the water onto its cradle on a new slipway dolly shortly.

    For this it is essential I have the dimensions and original profile plans of the hull, I really need these plans to configure the boat on it's cradle.

    I sincerely hope you guys are able to assist me with the above.
    I don't know if you need the craft's HIN number, but here it is anyway BERL 1259E485.

    Many thanks
  2. Pascal, Jan 23, 2010
    #2
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,570
    Location:
    Miami, FL
    did you try calling bertram? they should have that info... i know that Hatteras routinely supplies manuals and blueprints for jsut about any boat they built since the mid / late 60s.
  3. Seadog, Jan 24, 2010
    #3
    Seadog

    Seadog New Member

    Joined:
    May 31, 2009
    Messages:
    9
    Location:
    Port Alfred, South Africa
    I have already contacted them, but they said they don't have the plans, and it is sounds like they are unwilling to help. I was hoping someone might have some hull design plan, even if it's some thing similar.