Click for Nordhavn Click for Nordhavn Click for Glendinning Click for Northern Lights Click for Abeking

Azimut ignition problem

Discussion in 'Electronics' started by Gustavo Yaggi, Jul 11, 2021.

  1. Gustavo Yaggi, Jul 11, 2021
    #1
    Gustavo Yaggi

    Gustavo Yaggi New Member

    Joined:
    Sep 13, 2019
    Messages:
    2
    Location:
    United States
    Hi, i have a problem only with one motor, in the ignition key not receive 24v in one only ignition key, port.
    If i change the connector with 24v from starboard and made the check of the motor but send me an error in gauge cat.

    Anybody can helpme? I check all fuse, all are ok.

    Thanks!!
  2. Capt J, Jul 11, 2021
    #2
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,434
    Location:
    Fort Lauderdale
    Length? Year of vessel? Engines?
  3. Gustavo Yaggi, Jul 12, 2021
    #3
    Gustavo Yaggi

    Gustavo Yaggi New Member

    Joined:
    Sep 13, 2019
    Messages:
    2
    Location:
    United States
    Azimut 55' 2004 / 2 motors cat C12 . Thanks!!!
  4. Capt J, Jul 12, 2021
    #4
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,434
    Location:
    Fort Lauderdale
    I remember Azimut had a habit of putting glass fuses inside one of the (usually grey) breaker boxes in the engine room. Also CATS generally have a couple of fuses on the motor as well, a red 1" push in fuse and usually 2 other fuses. Check there.
  5. Capt Ralph, Jul 13, 2021
    #5
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,735
    Location:
    Satsuma, FL
    Oh yea, I remember the thread where the fuse was hidden in an ER box.
    Cats do have that breaker that does pop also.
    Put the two together (Cats & Muts) and anything is possibly a failure point.

    Take a breath, relax, remember; It's your Mut.