78' Chris-Craft Roamer

That's a whole lot more stable than a 57 Carver, but not matter the size boat the ocean can always get bigger. She's no Nordhaven.

That's funny . It's a gentleman's yacht. Good for live aboard and charter and should have the range you seek. I doubt you'll like it in 10' seas, but in what boat of this type would you. I'd recommend that you arrange a sea trial in the roughest conditions possible and get a feel for it like any other boat. As to survivability in a storm, that depends more on who's running it. It's not a Fedship or Nordhaven. It's also not a Carver .

Is this the boat?

http://www.baylinerpilothouse.com/100130/ORG/ORG/0/boatsbasic.aspx

I to have the same questions regarding how sea worthy these old Chris craft Roamers were. I understand this started out as a 68 and was later lengthened. Pro's and con's in general. Lots of boat for the price

I'm looking at a boat for the loop as well as some down island cruising.

Also any idea of fuel consumption at displacement speeds? 12v71ti's? 625hp.

Hopefully from someone who has actually run this type 68'.

Thanks

12v71ti's at 1000 rpms will burn 12gph for both, 1200 rpms it's 25gph for both, 800 rpms is 8 gph for both............speed depends on the hull......

Wow

That is an unbelievable deal... heck you can't get anything but a cheesy condo for that in the average parts of Northern Virginia. If this boat surveys, I can honestly say I have never seen such a deal at least based on the photos. It is great looking too!

Heck, why have a house!

Homer

Yes , a lot of bang for the buck, but it is an old metal hull with all the potential problems, no idea of engine or gen times, not mentioned, but the a
real concern is insurance, my current insurance will not touch the boat. So there are clearly some concerns, this same guy had a 68 romer that had 700k in restoration about ten months ago a bank sale at 70k and it was spectacular. I'm not sure we are anywhere near the bottom in terms of sales prices.

Ron

Amazing ... I agree that the boat is very attractive. Somebody has shown that boat an enormous amount of TLC.

It's a great time to buy a boat. Lots of choice ... excellent prices and choice of contractors ready to work and for more competitive prices than in the past.

Hope it goes to a good home.

Old Aluminum?

Are you saying the same of all old Burgers? Both boat use the same aluminum grade 5086. Fiberglass can't compare, but it does hold Awlgrip better near dissimilar metal areas. Aluminum also takes far less fuel to push.

If Aluminum is not the best, why are all the high-end super yachts made of it? Most old aluminum hulls are fine. That boat is a steal/Gorgeous by any meausre unless it does not survey. Plus iit is great looking.. that is the best opportunity I ever saw in a boat unless it does not survey-out.

Why buy a condo.. yachts don't have condo fees and if you don't like your neighbor or government, then just move.

That boat would cost probably 3.25 million dollars to build today... it's a great opportunity possibly. Have it surveyed, simple as that.

Of course old Bertrams are nice hulls.. but they have the most blah utilitarian interiors. Roamers are far better looking inside and out, but no question about a Bertram Hull in deep seas. Bertram is a great boat if you like going out in typhoids.

Thanks for all of the insight, what I'm really interested in is how these boats handle in a seaway, I'm considering it for the loop and near shore with occasional down island, Thanks

For what you want to do this boat would be more than fine.

No worries, just keep an eye on the weather, and it'll even take a reasonable bit of that.

78 roamer

My suspicion is that it was a sinker and is rebuilt, some of the joiner work does not look original CC type .

I have been aboard this boat. She is beautiful. Yes, some non-original interior finishes-but not a rebuilt sinker, not to my eye anyway.

Do you recall engine, gen, stabilizer /times/overhaul status? The broker did not have the info handy? I am going down next week to have a look.

PM sent.