Click for Mulder Click for Ocean Alexander Click for Walker Click for JetForums Click for Burger

6by2-260z yanmar

Discussion in 'Engines' started by bigboots, Oct 10, 2017.

You need to be registered and signed in to view this content.
  1. bigboots, Oct 10, 2017
    #1
    bigboots

    bigboots New Member

    Joined:
    Oct 10, 2017
    Messages:
    1
    Location:
    durham
    Hi all

    I am in a bit of a loose end. i have the above engine. and the yanmar i5601e display.

    I now have a loose end that i need help with if anyone can shed some light on.
    Engine has just done little over 100 hrs. Now i am getting check engine. now on the display this is all i am getting for some reason its not giving me the option to view diag codes. is there any reason why it's not letting me read the codes.engine is running smooth but when i push it to around 2500 revs it flashes check engine. i have striped the whole engine down. cleaned heat exchanges with riydelime. had turbo to be checked and its all working fine,elbow clean new fuel pump new temp sensor, new filters
  2. Capt J, Oct 10, 2017
    #2
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,528
    Location:
    Fort Lauderdale
    It sounds like you're just pissing in the wind and throwing money at it. You need to get a Yanmar tech out with the yanmar computer.