Click for Abeking Click for Burger Click for Delta Click for YF Listing Service Click for Westport

600hp MTU diesel

Discussion in 'Engines' started by Llerrad, Oct 1, 2023.

You need to be registered and signed in to view this content.
  1. Llerrad, Oct 1, 2023
    #1
    Llerrad

    Llerrad New Member

    Joined:
    Jun 27, 2023
    Messages:
    8
    Location:
    San Diego
    Is there anyone out there that can give me a rough estimate of how many gallons per hour a 600 hp MTU diesel burns. Let’s say she runs at 10 kn. Sorry I do not have any other details yet. Thank you very much.
  2. Capt J, Oct 2, 2023
    #2
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,500
    Location:
    Fort Lauderdale
    20 gph. Question is too vague, what rpms/load is it running at?
  3. mapism, Oct 2, 2023
    #3
    mapism

    mapism Senior Member

    Joined:
    Aug 9, 2008
    Messages:
    2,146
    Location:
    Sardinia
    Trouble is, 10kt could mean either running at 1000rpm and very low load on a planing boat, or WOT on a large and heavy trawler, with anything in between. So, the answer to your question is somewhere from 5 to 30+ gph, I'm afraid.
    StillLearning likes this.
  4. Llerrad, Oct 2, 2023
    #4
    Llerrad

    Llerrad New Member

    Joined:
    Jun 27, 2023
    Messages:
    8
    Location:
    San Diego
    Thank you for the response. The MTU engines, two of them, will be pushing a Malcolm Tennant designed 73 foot power cat. I was thinking anywhere, but between 1200 and 1400 RPM.
  5. Llerrad, Oct 3, 2023
    #5
    Llerrad

    Llerrad New Member

    Joined:
    Jun 27, 2023
    Messages:
    8
    Location:
    San Diego