Click for Abeking Click for Westport Click for Cross Click for Perko Click for Westport

1994 Carver 300 listing six inches to starboard

Discussion in 'Carver Yacht' started by Ericdel, Nov 8, 2024 at 1:08 PM.

You need to be registered and signed in to view this content.
  1. Ericdel

    Ericdel New Member

    Joined:
    Thursday
    Messages:
    1
    Location:
    Cherokee Lake TN
    I’m new to this boat and this forum, grateful for any insight…
    My bilges are empty, fuel tanks are both nearly empty, black water holding tank is empty. My 20 gallon fresh water holding tank has a leak, probably wasn’t winterized last year by the previous owner.
    Is it possible that there is water on the starboard side even if the bilge is dry?
    Thanks shipmates. Eric SM2 USN 86-90
  2. Norseman

    Norseman Senior Member

    Joined:
    Feb 24, 2005
    Messages:
    3,110
    Location:
    Ft. Lauderdale
    Water soaked hull?
    Or the battery banks and/or tools and spares on the Starboard side?
    Is the boat sitting low in the water? (It shouldn’t if all the tanks are empty)
    It always helps to post a picture.
  3. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,434
    Location:
    Satsuma, FL
    What has changed since factory?
    Gen-set relocated or removed?
    Both engines complete (no missing parts)?
    6 inches measuring from where?
    How many people on the other beam does it take to level the boat? Ad that weight up to help guied us how much weight your typing about.
    How do you know your tanks are empty? With a stick or looking at an old level meter?

    Do you have a dink on board?
    Last edited: Nov 11, 2024 at 11:47 AM