Click for Abeking Click for Furuno Click for YF Listing Service Click for Cross Click for Northern Lights

1981 46' viking conv rudder

Discussion in 'Viking Yacht' started by PFalkner, Jun 13, 2022.

You need to be registered and signed in to view this content.
  1. PFalkner, Jun 13, 2022
    #1
    PFalkner

    PFalkner New Member

    Joined:
    Nov 13, 2020
    Messages:
    15
    Location:
    connecticut
    I replaced the rudder shafts due to corrosion and I am in the process of replacing the rudder table. My question is what is the toe in or toe out of the rudders. I was told the rudders are not parallel to keep tension on steering linkage sort of like a toe in on a car. Any info? Thanks
  2. Capt Ralph, Jun 13, 2022
    #2
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,726
    Location:
    Satsuma, FL
    I usually set them up that the aft edges were 3/8 to 1/2 inch closer together than the forward edges on boats your sized.
    It just needs a little to keep the rudders from chattering.
  3. PFalkner, Jun 14, 2022
    #3
    PFalkner

    PFalkner New Member

    Joined:
    Nov 13, 2020
    Messages:
    15
    Location:
    connecticut
    thanks for the info