Click for Ocean Alexander Click for Glendinning Click for YF Listing Service Click for Abeking Click for Nordhavn

1977 Carver Ranger - Unknown Switches

Discussion in 'Carver Yacht' started by Rearadmiral, May 5, 2014.

You need to be registered and signed in to view this content.
  1. Rearadmiral, May 5, 2014
    #1
    Rearadmiral

    Rearadmiral New Member

    Joined:
    May 5, 2014
    Messages:
    1
    Location:
    Tampa, FL
    Hi,

    I'm finishing restoring an old 1977 Carver Ranger and was wondering if someone could help me identify some switches that I have no clue what they are used for. I've asked a few boater and I've tried googling, but I haven't had much luck. I've tried tracing some of the wiring but I believe they terminate somewhere in the 5th dimension. I'm an experienced mechanic but this is my first boat so please pardon my noob ignorance!

    First, I have no clue what aux volts vs. fuel volts are, what are the appropriate use for each setting?

    http://s16.postimg.org/tn6044vcl/20140505_154621.jpg

    Next, I have a push button and 2 rocker switches that are unmarked and I'm at a loss as to what they do. There's also a sliding lever next to the throttle:

    http://s21.postimg.org/3kojf8r13/20140505_154645.jpg

    Thanks for any assistance!