tamd74p checked the prop last haulout and it was fine. due for a haul out next month and will check again. haven't checked the turbo as yet. 1265...
i have the above engines. i have recently noticed a lot of soot on the transom after a couple of hours running and the port engine will not reach...
tamd 74 edc control turns out the problem with the controller was related to a clogged filter on the solonoid which is connected to the...
edc controls fishtigua, thanks very much for all your asistance. i'll let you know the outcome. the tough part is finding that competent...
volvo edc control thanks for the info.
volvo 74Pedc the engine stalls under load 2200 rpm and at low speed 600-1200 rpm and just about any speed in between. air cleaners are clean,fuel...
edc controls the problem occurs on the starboard engine only at both the upper and lower helms. another problem that has come up is with the...
edc control Thanks for the prompt reply. yes,this occurs at both stations.
i have twin Volvo 74P EDC engines in my 2002 Carver 450 Voyager. There is normally a 1 second delay when the throttles are engaged, however the...
Tamd74 Will do. Thanks. Getting lots of responses. This is a great site!
Tamd74 Thanks. Will check it out.
Tamd74 Thanks Fishtigua No overheating issues. lots of water flowing and the temp readings on both engines are the same and at the right temp....
74D soot had the same problem. turned out to be a crack in the exhaust elbow. mechanic found it when under load at about 2000 rpm. took me about...
I have a problem with my port engine in my 2002 carver 450 voyager.these are the Volvo TAMD74P EDC 480 H/P engines.Both engines start up easily...