[ATTACH] [ATTACH] Unsure who you were asking for pictures from but here is a picture of an offset tube and one of a mixing elbow next to 2 old...
Wasn't there a thread on this forum while ago that had a similar issue which turned out to be the Neutral and Ground were bonded at the generator ?
Had the same problem and the same solution in 2016. You can't believe how much rust and scale will accumulate in the mixing elbow. I removed the...
I am thinking that your ship to ship/ship to shore id more or less in the American waters tho ? Slightly stricter guidelines and you are much...
Mine is not really nailed down. The floor of the cabinet has recessed circles, like a hole saw slug, almost the depth of the feet of the...
Would you check back and tell if you are satisfied with the install and what manufacturer you went with ?
I don't want to de-rail this thread but I would like to know how you keep crap from growing on a seldom used thruster prop. I run my boat every...
Are each of your 50 amp cords rated at 50 a 125 volt or 50 amp 125/250 volt ? I am guessing 50 125 volt. If so: You need a 50 amp 125/250 male...
This should prolly be a different thread altogether. I cannot believe that is SOP for the FWC to depart from a vessel. Made me cringe seeing...
If this thread was posted 2 weeks ago I could answer you about mine but during that short haul it did not occur to me to even look. I was just so...
Totally agree here. When the technology gets there , in however many years, people will WANT to go electric , but for now we are just not there yet.
I do not know the answer to your question but I would LOVE to be the contractor that is awarded the charger installation job throughout any city...
[MEDIA] Business was bad after the virus & Shipping license canceled by owners 1000 meters deep.....no one hurt
https://www.myeasternshoremd.com/kent_county_news/news/boat-destroyed-by-fire-sinks-in-its-slip-at-marina/article_6edf00fc-e3a8-5d85-9f28-02a093fdf...
+ 1
Mama Mia !
But a good to to confirm the ammeter on the panel
You are correct. You need to be able clamp it at the line or load side of the breaker.
https://www.toolup.com/Klein-CL800-Digital-Clamp-Meter-AC-DC-Auto-Ranging-600A?msclkid=80b32bbb6e97126708884934a54edad0 The link above will take...
Very nice. I have always liked those boats. As Maldwin said, it is nice to see an older boat taken care of and restored. Good luck with her.
