I'll let you know what I find out . We're in the heavy rigging business and buy lots of chain every year. Our main supplier is working something...
I'm planning to replace mine with 316 stainless this year. Marine Now was one of the vendors I looked at but I'm still waiting on one more quote.
The stop lever on a 671 is on the governor. On mine if you kill the ignition first the fuel shutdown solonoid won't get power when you push the...
We run all our 671's 1/2 gallon low for the same reason. I run my 6v92's almost a gallon low and don't have to add oil between changes.
I would start at the solonoid with a meter and work backward toward the start switch with the switch in the start position.You'll need a helper...
I feel you can jump across the the solonoid and start it , you don't have a battery problem?
Chris Craft antique boat owners association is probably still alive and all the original drawings are at the mariners museum in Norfolk. I've...
I've never run a 43 but I spent a few hours on an early 42' and have put about 800 hours on a 93 46' which I have owned for a few years with no...
I've never seem a sealed bell housing on a gasoline engine. If you seal it and one of the rear freeze plugs leaks you'll end up presurizing the...
I've not spent much time on center consoles but there are a lot of Sea Hunts in our neck of the woods. I've been out on a 30' with twin 300...
Based on the photo, you don't have enough shaft to shorten.
I got my a$$ chewed out going under Circus bridge close to Tampa on one engine in and out of gear for going too fast. When I explained that I had...
Correction...R12
It's R22, I figured it out today.
Thanks Ralph. I know ther is a number somewhere but I haven't located it yet. Rigging up some better lights now. I can see where a tag used to be...
1992 Post 46 cockpit compressor running but freezer won't cool. I don't have any documentation and can't find a name on it anywhere. Does anyone...
If you're going to start a Detroit that hasn't been run in a few years and doesn't have an e-stop make sure you have some means of blocking the...
The last 351 I put together with 302 heads went in a Correct Craft Southwind 20. We went up 2'' in pitch on the wheel and the boat is still...
I like to put the 302 heads on a 351 Windsor block. The smaller combustion chambers will give you more compression and boost performance considerably.
I got the same letter from the same company and never had a claim. You might try Bradley Insurance Group out of south Florida.
